Canon MF7280 imageCLASS MF7280 Easy Operation Guide - Page 17
Report Settings, Timer Settings, Adjustment/Cleaning - fuser
UPC - 013803056129
View all Canon MF7280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Additional Functions 2 Timer Settings Reference Guide Chapter 3 Enables you to make various timer related settings for the machine, such as the time it takes for the machine to enter into the Sleep mode. Date & Time Settings Enables you to set current date and time. The date and time set here is used as the time setting when required for any of the device functions. Auto Sleep Time Enables you to set the machine to automatically switch the control panel power switch OFF when it has been idle for a certain period of time after the last print job or a key operation is performed. Auto Clear Time Enables you to set the machine to automatically return to the Basic Features screen of the selected function when it has been idle for a certain period of time after the last print job or a key operation is performed. (1/1) 3 Adjustment/Cleaning Reference Guide Chapter 3, 6 Enables you to make fine adjustments to the zoom, adjust the contrast, or perform cleaning for the machine. Transfer Roller Cleaning Enables you to clean the transcription roller in the main unit when the backside of paper is smudged with printing. Fixing Unit Cleaning Enables you to clean the fuser roller in the main unit when black streaks appear with printing or you replace the toner cartridges. Feeder Cleaning Enables you to clean the rollers of the feeder by repeatedly feeding blank sheets of paper through it. (1/3) Special Mode M Enables you to improve the print quality or irregular print density. Special Mode N Enables you to prevent paper curling or jamming. Special Mode O Enables you to prevent paper jams with two-sided printing. Special Mode P Enables you to use more efficiently lightweight paper for printing. (2/3) 31 Additional Functions Bond Special Fixing Mode Enables you to specify to perform special fixing for bond paper. Special Mode S Enables you to choose whether to set a high priority on avoiding offset or on speed. Auto Adjustment for Dirty Feeder When this function is set to 'On', dust, dirt or foreign objects in the feeder will not be printed. (3/3) 4 Report Settings Facsimile Guide Chapter 7 Sending Guide Chapter 10 Press to set the print conditions for printing a TX Report and Activity Report, or you can print the contents of the Address Book or Additional Functions. Settings Enables you to set the print conditions for printing a TX Report and Activity Report. TX Report Enables you to check whether faxes were sent correctly to the intended destination. A TX Report can automatically be printed after the documents are sent. You can also set the machine to print a TX Report only when a transmission error occurs. Activity Report Enables you to show the results of sent and received documents. You can set for the Activity Report to be printed at a specified time or be automatically printed when the number of sent and received documents reaches 40. You can also print the send and receive logs separately. RX Report Enables you to check whether the documents were sent correctly from the sender's machine and were received successfully by this machine. A RX Report can be printed automatically after documents are received. You can also set the machine to print a RX Report only when a reception error occurs. Print List Enables you to print an Address Book List or a User's Data List (contents of the settings specified from the Additional Functions screen). 32 Other Useful Features Additional Functions Send Functions Copying Functions Preface