Canon PC940 Service Manual - Page 249

Step 16 Work While bending the ADF auxiliary tray in the direction of arrows in the figure, insert it into the holes on the edge of the original tray. Caution: This step applies to the ADF type only. CHAPTER 9 INSTALLATION Checks and remarks Holes 17 Slide in and out the auxiliary tray several times to make sure that it moves smoothly. Caution: This step applies to the ADF type only. ADF auxiliary tray ADF auxiliary tray 18 Connect the power cord to the power cord connector. 19 Connect the power plug to the power outlet; • Make sure that the AE and DIRECT indica- then, turn on the power switch. tors turn on, the count/ratio indicator indi- cates '1'. • Press the Count/Zoom Set key and the Clear/Stop key to check that the copy count is correct. • Press the Default Ratio key to check that different ratios are indicated. • Check to make sure that a press on the Zoom Mode key turns on the '0' indication and a press on the Count/Zoom Set key will indicate the correct ratio. COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON) 9-7