Canon PIXMA MP640 Network Setup Troubleshooting - Page 16

©canon Inc.2009, Printed In Thailand

Add to My Manuals
Save this manual to your list of manuals

QT5-2657-V01 XXXXXXXX ©CANON INC.2009 PRINTED IN THAILAND

Section	Page
Problems during Network Setup	3
Easy Settings	3
The Target Access Point is Not Displayed (Detected)	3
Failed to connect to the access point. is Displayed	4
Access point was not detected is Displayed	5
Multiple access points with the same name exist. is Displayed	5
WPS Settings	6
Cannot connect. Multiple access points are enabled. is Displayed	6
Connection failed. is Displayed	6
Problems during Software Installation	6
The Machine is Not Displayed (Detected)	6
Check Printer Settings dialog box is displayed	7
Other Troubleshooting Tips	8
Forgotten or Do Not Know the Access Point Name/Network Name (SSID), Security Protocol (encryption standard), and Network Key	8
The Machine is Not Detected after the Network Environment is Changed	8
Reference Information	9
Entering the Access Point's Wireless LAN Settings Directly on the Machine	9
Specifying the Machine's IP Address (IPv4 only)	11
Restoring the Machine's Default LAN Settings to Perform Setup Again	12
Connection Checklist	13

Match case Limit results 1 per page

QT5-2657-V01

XXXXXXXX

PRINTED IN THAILAND