Canon PIXMA MP640 Network Setup Troubleshooting - Page 5

Access point was not detected is Displayed Check The message appears when no access point is found. Refer to "The Target Access Point is Not Displayed (Detected)" on page 1. Multiple access points with the same name exist. is Displayed Check The message appears when multiple access points with the same name are found. When you have only one access point Select Use one AP only, then select the MAC address of the target access point. • For subsequent operations, go to step in "Entering the Access Point's Wireless LAN Settings Directly on the Machine" on page 7. • For details on how to check the MAC address of the access point, refer to the manual supplied with the access point or contact its manufacturer. When using multiple access points Select Use multiple APs. • For subsequent operations, go to step Directly on the Machine" on page 7. in "Entering the Access Point's Wireless LAN Settings Glossary • MAC address A unique number assigned to each network device.