Canon PowerShot SX100 IS Silver PowerShot SX 100 IS Camera User Guide - Page 169
Image contains noise., White dots appear on the image., Eyes appear red.
View all Canon PowerShot SX100 IS Silver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
Troubleshooting 167 Flash is set to on). (Flash z Push down the flash to (p. 65). (Flash off) Image contains noise. ISO speed is too high. z Higher ISO speeds and (High ISO Auto) setting may increase image noise. For higher image quality, use as low an ISO speed as possible (p. 110). z In , and , , modes in the mode or when using the Auto ISO Shift, the ISO speed increases and noise can appear. White dots appear on the image. Light from the flash has z This is a phenomenon that occurs reflected off dust particles or with digital cameras and does not insects in the air. This is constitute a malfunction. particularly noticeable when shooting using the wide angle or when you increase the aperture value in the aperture-priority mode. Eyes appear red. Light is reflected back from z Turn [On] the Red-Eye setting in the the eyes when the flash is Rec. menu (p. 93). For this mode to used in dark areas. be effective, the subject must be looking right at the red-eye reduction lamp. Try asking them to look directly at the lamp. Even better results can be obtained by increasing the lighting in indoor settings or approaching closer to the subject. z You can correct red eyes in images using the Red-Eye Correction function (p. 144).