Canon SELPHY CP740 SELPHY CP750 / CP740 Printing Guide - Page 7

Printing by Connecting Your Camera, Printing from Mobile Phones - manual

Page 7 highlights

Printing by Connecting Your Camera If your Canon digital camera has a (Print/Share) button, you can connect the camera to the printer for easy printing. 1 Pull the cable out of the printer and attach it to the camera's DIGITAL terminal. Extends up to 30 cm (12 in.) Retracting the Cable Lightly pull on the cable, then while holding the cable let it retract into the printer. DIGITAL Terminal Confirm that all memory cards have been removed from the printer. 2 Press and hold the printer's power button until the start-up image displays on the LCD monitor. 3 Select an image on the camera's LCD monitor and press the (Print/Share) button. Non-Canon brand cameras that are compliant with PictBridge can also be used. If the connector on the cable does not fit your camera's terminal, use the USB cable supplied with your camera. Refer to your camera's operation manual for further details. Printing from Mobile Phones The CP750 can print without a cable connection from a mobile phone that supports infrared data transmission (IrDA, IrSimple). If you use a mobile phone that supports the Bluetooth protocol, you can print wirelessly with the separately sold Bluetooth Unit BU-20. Up to approximately 20 cm (7.9 in.) Hold the mobile phone within 10 degrees of the sensor in any direction. The distance over which infrared data signals can be transmitted varies according to the mobile phone model and transmission environment. The signal transmission distance for Bluetooth is about 10 m (32.8 ft.). 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

7
Printing by Connecting Your Camera
If your Canon digital camera has a
(Print/Share) button, you can
connect the camera to the printer for easy printing.
Printing from Mobile Phones
The CP750 can print without a cable connection from a mobile phone
that supports infrared data transmission (IrDA, IrSimple). If you use a
mobile phone that supports the Bluetooth protocol, you can print
wirelessly with the separately sold Bluetooth Unit BU-20.
1
Pull the cable out of the printer and attach it to the camera’s DIGITAL
terminal.
2
Press and hold the printer’s power button until the start-up image
displays on the LCD monitor.
3
Select an image on the camera’s LCD monitor and press the
(Print/Share) button.
Extends up to 30 cm (12 in.)
DIGITAL Terminal
Confirm that all memory
cards have been removed
from the printer.
Retracting the Cable
Lightly pull on the cable,
then while holding the
cable let it retract into
the printer.
Non-Canon brand cameras that are
compliant with PictBridge can also be
used. If the connector on the cable does
not fit your camera’s terminal, use the
USB cable supplied with your camera.
Refer to your camera’s operation
manual for further details.
Up to approximately
20 cm (7.9 in.)
Hold the mobile phone within 10
degrees of the sensor in any direction.
The distance over which infrared
data signals can be transmitted
varies according to the mobile
phone model and transmission
environment.
The signal transmission distance for
Bluetooth is about 10 m (32.8 ft.).