Canon VB-R13VE User Manual - Page 111
Installation Conditions, Camera Position Control, External Input Device 1
View all Canon VB-R13VE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Installation Conditions Configure settings for camera use suitable for the location the camera will be installed. [LED Setting] M50 Select whether to turn on the LED indicating the camera operation status. Even if you set [Turn Off], the LED will light for several seconds during startup. [Image Flip] Select whether to vertically flip the video. Select the setting suited to the camera installation method, such as ceiling mounting or placing on a desk. 5 Camera Position Control Settings for camera use when there are no camera control restrictions for users or requests for camera control privileges. [Restricted to Presets] R13 R12 M50 Restricts camera control of the camera angle, such as with Camera Viewer, to presets, including the home position, for users other than administrators. [Camera Position without Control] Select the camera operation when there are no users with camera control privileges. If [Return to Home Position] has been selected, the home position of the camera must be set in advance with [Camera] > [Preset] > [Preset Registration] (P. 131). Setting Page External Input Device 1, 2 R13 M50 H652 H651 Enter each device name in order to identify the corresponding external input device being connected. There are two external input device terminals on the camera. [Device Name] Enter the name of the device connected to the external input device terminal. External Output Device 1, 2 R13 M50 H652 H651 Enter each device name in order to identify the corresponding external output device being connected. There are two external output device terminals on the camera. [Device Name] Enter the name of the device connected to the external output device terminal. 111