Canon VB-R13VE User Manual - Page 115
Manually set [Shutter Speed], [Aperture], and [Gain]., Auto Aperture-priority AE]
View all Canon VB-R13VE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
[Exposure] Selects an exposure mode. Note If [Auto] is selected in [Day/Night], select either [Auto], [Auto (Flickerless)], [Auto (Shutter-priority AE)] or [Auto (Aperture-priority AE)] for [Exposure]. [Auto] Automatically controls the exposure. [Auto (Flickerless)] Automatically adjusts the shutter speed according to the brightness of the usage environment. Video flickering caused by fluorescent lights, etc., is reduced. [Auto (Shutter-priority AE)] Automatically adjusts the aperture and gain according to the specified [Shutter Speed]. [Auto (Aperture-priority AE)] Automatically adjusts the gain and shutter speed according to the specified [Aperture]. [Manual] Manually set [Shutter Speed], [Aperture], and [Gain]. Cannot be set when [Smart Shade Control] is set to [Auto]. [AGC Limit] Select the Auto Gain Control (AGC) limit value for increasing gain to brighten video in low light conditions. The greater the value, the higher the sensitivity will become, but video noise will increase. Important • [AGC Limit] will not function if [Exposure] is set to [Manual] or [Auto (Flickerless)]. • Minimum subject illumination may change when [AGC Limit] is set. [Slow Shutter] If [Exposure] is set to [Auto], [Auto (Flickerless)], or [Auto (Aperture-priority AE)], a minimum shutter speed from can be selected. If you select [Disable], the minimum shutter speed is [1/30] seconds. Slower shutter speeds generate afterimages in video when capturing a moving subject. [Shutter Speed] When [Auto (Shutter-priority AE)] or [Manual] is selected for [Exposure], you can select the shutter speed. If [Auto (Shutter-priority AE)] is set, a speed from [1/2] to [1/16000] seconds can be selected. If [Manual] is set, a speed from [1/1] to [1/16000] seconds can be selected. When capturing a moving subject, selecting a higher shutter speed can reduce blurry video capture. Important • If a traffic signal, electronic scoreboard, etc. is captured the video may flicker. In this case, try changing [Exposure] to [Auto (Shutterpriority AE)] and then select a shutter speed lower than 1/100 seconds so that the condition improves. • Setting a slow shutter speed may prevent the intelligent function from working correctly. Select a shutter speed that suits the capture conditions and purpose. [Aperture] If [Auto (Aperture-priority AE)] or [Manual] is selected for [Exposure], set a desired aperture. Moving the slider to the left closes the aperture and darkens the image. Moving the slider to the right opens the aperture and brightens the image. [Gain] If [Manual] is selected for [Exposure], set the sensitivity to affect brightness. Moving the slider to the left darkens the video, and moving it to the right brightens video. [Exposure Compensation] When [Exposure] is set other than [Manual], you can adjust the brightness of the video by selecting the [Exposure Compensation]. Setting Page 5 115