Canon VB-R13VE User Manual - Page 165

[ON Event Operation] If [Enable] is set, [Preset], [Video Record] and [E-mail Notification] will be executed according to their settings when a volume detection event (ON event) is triggered. [OFF Event Operation] If [Enable] is set, [Preset], [Video Record] and [E-mail Notification] will be executed according to their settings when a volume detection event (OFF event) is completed. [Ongoing ON Event Operation] Select the operation to be performed when an ON event is triggered. This can be set when [ON Event Operation] is set to [Enable]. If [Enable] is selected, [Video Record] and [E-mail Notification] will be executed according to their settings during the volume detection event. [Preset] R13 M50 If you specify a preset, the camera angle will automatically move to the preset location when a volume detection event is triggered. It is necessary to set presets beforehand with [Camera] > [Preset] (P. 131). Important R13 M50 When the camera is triggered by a volume detection event and moved to a preset position specified in the [Preset] settings, camera control privileges are released, even if the user has obtained those camera control privileges using the Camera Viewer or other camera control applications. [Video Record] Select whether to record video depending on the volume detection event. If you select [Enable] and a volume detection event is triggered, video will be transmitted to the recording destination specified in [Video Record] > [Upload] > [Video Record Action] (P. 156). [E-mail Notification] Select whether to send an e-mail notification depending on the volume detection event. If you select [Enable] and a volume detection event is triggered, an e-mail notification will be sent. To use e-mail notification, you must set [Video Record] > [E-mail Notification] (P. 160) beforehand. [External Device Output for ON Event] Select whether external device output (1 or 2) is active or inactive when an ON event is triggered. [External Device Output for OFF Event] Select whether external device output (1 or 2) is active or inactive when an OFF event is triggered. Setting Page 5 Scream Detection A scream detection event is triggered when sounds from someone, such as a scream or cry, are detected. You can also set the operations to perform depending on the scream detection event. Important • Scream detection detects abnormal sound in relatively quiet environments. Detection is difficult in noisy environments. • The scream detection is not a voice recognition function. • Detection may be difficult if an excessively loud scream is input. • Detection may be difficult if the duration of the scream is short. • Detection may be temporarily difficult if the same sound is input repeatedly multiple times. [Scream Detection Event] Select whether to use scream detection event. [ON Event Operation] If [Enable] is set, [Preset], [Video Record] and [E-mail Notification] will be executed according to their settings when a scream detection event (ON event) is triggered. [Preset] R13 M50 If you specify a preset, the camera angle will automatically move to the preset location when a scream detection event is triggered. 165