Canon imageCLASS MF3110 imageCLASS MF3111 Basic Guide - Page 96
LCD Messages
View all Canon imageCLASS MF3110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
LCD Messages The following messages are displayed in the LCD when the machine performs a function or if it encounters an error. ADJUSTING WAITING TO SCAN Cause The machine is not ready for copying because you have just connected the power cord to the machine. Remedy Wait for a while. The machine cannot scan documents for copying immediately after the power cord is connected. Troubleshooting CHECK PAPER SIZE Cause The size of the paper in the cassette or multi-purpose feeder is different from that of the paper specified in of the Menu. Remedy Load the correct paper size or change in of the Menu. (See "Loading Paper," on p. 2-4, or "Specifying the Paper Size," on p. 2-11.) Then reset the machine by opening the front cover and then closing it. 9 CHECK PRINTER Cause A problem has occurred in the printer. Remedy Reset the machine by opening the front cover and then closing it. If the message persists, unplug the machine from the power supply and contact Canon Authorized Service Facilities or the Canon Customer Care Center. CHECK PRINTER COVER Cause The front cover is not closed completely. Remedy Check the front cover, and make sure that it is completely closed. INSTALL CARTRIDGE Cause The cartridge is not installed or not installed correctly. Remedy Install the cartridge correctly. (See "Replacing the Cartridge," on p. 8-13.) 9-8 LCD Messages