Canon imageFORMULA DR-7580 User Manual - Page 47
How to Place Documents
View all Canon imageFORMULA DR-7580 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
4.1 Documents Wrinkled or creased paper Curled paper Torn paper Paper with clips or staples Carbon-backed paper Coated paper or fax recording paper Extremely thin paper Paper with binding holes Note ● Note that mixing documents of different thickness and size may cause a malfunction during feeding. ● Heavily curled wrinkled, or creased documents may cause them to double feed. ● Documents containing text or pictures within 0.2" (5 mm) of its edges or documents with a color background may cause erroneous skew detection or automatic size detection. How to Place Documents 4 Note the following points when placing documents on the scanner. ● Place the documents face up in the document tray. ● Do not exceed the load limitation mark when placing documents in the document tray. It may cause paper jams. Small Size Limitation Mark: When placing documents that are smaller than LTR/A4 size. Large Size Limitation Mark: When placing documents that are larger than LTR/A4 size. ● It is possible to place approximately 500 documents of regular LTR/A4 size (80g/m2 or 20 lb bond), or approximately 200 documents of larger than LTR size. ● If the document tray does not rise and makes a "clacking" noise, then the amount of paper placed on the document tray may weigh too much even if the documents do not exceed the limitation mark. Reduce the amount of pages and scan the documents again. ● In the Long Document mode, if you place a long document askew in the document tray, it will rub against both sides of the feeding path and may damage the document. Be sure to align the document straight when placing it in the document tray. (See p.61.) 43