Canon imagePROGRAF GP-300 imagePROGRAF GP-300 GP-200 series User Manual - Page 498

Set a PIN Code for Print Jobs If you set a PIN code to your print jobs, the print jobs remain in standby status until the PIN code is entered on the printer operation panel. As the material is printed immediately after entering the PIN code, issues such as retrieving the wrong documents and allowing others to peek at your documents can be prevented. The procedure for setting a PIN code to your print jobs is explained here. 1. Select Additional Settings from the pop-up menu of the Print Dialog 2. Set the PIN code Place a checkmark next to Set PIN for printing, and enter a one to seven-digit number in PIN. 3. Complete the setup Click Print. When you print, the print job is set to standby status on the printer unit. If you enter the PIN code you set on the printer operation panel, the print job will be printed. Note • See "Printing Security Print Jobs" for instructions on how to operate using the printer operation panel. • Print jobs with a PIN code set are not saved on the printer hard disk. Related Topics Specifying Color Correction 498