Canon imagePROGRAF GP-300 imagePROGRAF GP-300 GP-200 series User Manual - Page 615
Is the paper thick, or a type that curls easily or is prone to buckling after
View all Canon imagePROGRAF GP-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 615 highlights
If not loaded properly, paper can buckle and rub against the Print head. Reload the paper. Loading Rolls in the Printer Loading Sheets in the Printer Check 4 Is the Print head height set too low? Set Paper thickness (head height) in the touch screen menu to the value higher than the current one. Troubleshooting Paper Abrasion and Blurry Images Check 5 Is the paper thick, or a type that curls easily or is prone to buckling after absorbing ink? If using paper-based printing material such as Heavyweight Coated Paper, set Transport unit vacuum strength in the touch screen menu to Medium-strong or Strong. If that does not resolve the problem, increase the Paper thickness (head height) setting in the touch screen menu. Adjusting Vacuum Strength Troubleshooting Paper Abrasion and Blurry Images If using film-based printing material such as CAD Tracing Paper, set the Transport unit vacuum strength in the touch screen menu to Standard, Medium-strong, or Strong. If that does not resolve the problem, increase the Paper thickness (head height) setting in the touch screen menu. Adjusting Vacuum Strength Troubleshooting Paper Abrasion and Blurry Images If using paper thinner than 0.004 inches (0.1 mm), set Transport unit vacuum strength in the touch screen menu to Weak. If that does not resolve the problem, increase the Paper thickness (head height) setting in the touch screen menu. Adjusting Vacuum Strength Troubleshooting Paper Abrasion and Blurry Images Check 6 Does the paper have a strong curl at the front edge or is it buckled? Set Cutting mode in the touch screen menu to User cut, and set leading edge detection to Do not detect. In this case, to keep track of the amount of remaining roll paper, set Manage remaining roll amount to OFF before loading the roll paper, and then restore the setting of Manage remaining roll amount to ON after the roll paper is loaded. Specifying the Cutting Method for Rolls Keeping Track of the Amount of Roll Paper Left 615