Canon imagePROGRAF GP-300 imagePROGRAF GP-300 GP-200 series User Manual - Page 511

Advanced Paper Settings Use this dialog box to set detailed print settings that match the media type loaded on the printer. If the paper becomes stained during printing or if the quality of the print results is less than expected, using these settings may improve the print results. Dry Time (Between Pages) Allows you to set the interval between the time each page is printed and the time it exits the printer. Since a certain waiting time is required for the ink to dry before the roll paper is cut, even when automatic cutting is set, you can cut the paper when the ink is dry. The Dry Time (Between Pages) setting is effective only for roll paper. Printer Default Applies the settings configured in operation panel of the printer. None Documents are ejected immediately after printing is over. 30 seconds / 1 minute / 3 minutes / 5 minutes / 10 minutes / 30 minutes / 60 minutes After printing is over, documents are ejected after the set time has elapsed. Dry Time (Between Scans) Allows you to set the interval between the printing of a scan on a page and the printing of the next scan. Prevents ink bleeding on a page or uneven coloring during borderless printing. Printer Default Applies the settings configured in operation panel of the printer. None Each scan is printed immediately after the previous one. 0.5 seconds / 1 second / 3 seconds / 5 seconds / 7 seconds / 9 seconds After one scan has been printed, the next one will be printed after the set time has elapsed. Increase the interval depending on the occurrence of bleeding and uneven coloring. 511