Canon imagePROGRAF GP-300 imagePROGRAF GP-300 GP-200 series User Manual - Page 512

Roll Paper Safety Margin Allows you to specify the length of the white margins on the edges of the paper in order to make even significantly curled paper adsorb to the platen. Printer Default Applies the settings configured in operation panel of the printer. 3mm Prints in standard-size. Choose this setting if there are no particular problems when printing. 20mm Choose this setting in case of chafing against the print head, for example when using significantly curled paper. Cut Speed Allows you to select the speed of automatic cutting. Use it to adjust the automatic cutting function when clean cutting is not possible. Printer Default Applies the settings configured in operation panel of the printer. Fast Choose this if clean cut surfaces are not possible with the Standard setting. Standard Choose this if there are no particular problems with automatic cutting. Slow Choose it when using adhesive paper in order to prevent the glue from sticking to the cutter and to avoid a drop in cutting performance. Automatic Cutting You can set whether to have the paper cut automatically or to have cut lines printed on the paper. The following settings can be configured for automatic cutting. Printer Default Applies the settings configured in the operation panel of the printer unit. None After printing is over, the printer goes on to print the next set of data without cutting the paper into individual pages. Print Cut Guideline After printing is over, the printer prints cutting lines on each page and goes on to print the next set of data. Unidirectional Printing Suppresses uneven coloring and line shifts during printing. To perform unidirectional printing, check this check box. 512