Casio CW 100 User Guide - Page 19

Printing on a disc that already has something printed on it This printer will not print properly over a logo or other printing that is already on a disc. For such a disc, you will need to use the print- er's built-in printing guide to make sure that printing is performed in the correct location. 1 Pull the printing guide from the printer. Note You do not need to use the printing guide if the disc you are printing on does not have anything printed on it. 2 Adjust the position of the disc. Important! • Pressing in on the disc tray or pressing the eject button while adjusting the position of the disc will cause the disc tray to close. When adjusting the disc position, use your other hand to hold the disc tray still. Position the disc so the upper label area is facing towards you. Position the disc so the printing areas marked on the printing guide are parallel with the logo and other printing. Printing area • If you want to print only in the lower label area, position the disc so the upper label area is facing towards you. • For more information, see the separate "Printing Precautions". 4. Close the disc tray. • Press in lightly on the tray, press the Eject button, or click the button on the DISC TITLE PRINTER application screen. Important! • Take care to avoid catching your fingers or hand in the disc tray when closing it. 5. Click Start printing. • This starts the printing operation. • The disc tray will open automatically after printing is complete. When this happens, remove the disc from the tray. Important! • Never disconnect the printer's AC adaptor power cord or the USB cable while printing is in progress. Doing so can cause malfunction of the printer. This completes the printing operation. 18