Casio CW-K85 User Guide - Page 12

2. Connect the AC adaptor plug to the printer's AC adaptor terminal (1), and then plug the power cord into a household power outlet (2). 1 2 ■ To disconnect the AC adaptor Important! • Never disconnect the AC adaptor while a printing operation is in progress. Doing so creates the risk of printer malfunction. • Never disconnect the AC adaptor or remove the batteries while the printer is turned on. Also, make sure that the display is completely blank after turning off the printer before disconnecting the AC adaptor or removing the batteries. Disconnecting the AC adaptor or removing the batteries at the wrong time can cause loss of text you are working on, as well as data you have stored in printer memory. 1. Unplug the power cord from the wall outlet (1), and then unplug the AC adaptor from the printer (2). • Take care that you do not excessively bend or twist, or pull on either end of the power cord (points marked A and B in the illustration). Take care that the power cord is not bent excessively at these points when storing the cord. Any of the conditions mentioned above can cause breaks in the wiring of the cord. AB Using Batteries Note • The printer can run on eight AA-size alkaline batteries. Be sure to use alkaline batteries only. 1. Turn over the printer and remove the bat- tery cover. • Never bend or twist the battery cover, or otherwise subject it to rough handling. Doing so creates the risk of printer malfunction. 2 1 2. Load a set of eight new batteries. • Make sure the positive g and negative h poles of the batteries are facing in the proper directions. E 10