Casio CW-K85 User Guide - Page 49

Troubleshooting Consult the troubleshooting tables below whenever you start to have problems with the printer or application. If you can't find the solution to your problem below, contact your original retailer or your nearest authorized CASIO service center. Symptom Nothing appears on the display when I press . The printing operation is finished normally, but nothing is printed. Possible Cause The display contrast setting needs adjustment. The AC adaptor is not connected properly. Battery power is low or the wrong type of batteries are loaded in the printer. Batteries are not loaded properly. Only spaces are input for the label. The file imported from a computer does not contain any data. Recommended Action Adjust the display contrast setting. (page 45) Make sure the AC adaptor is properly connected. (page 9) Change to AC adaptor power or replace the current batteries with a fresh set of AA-size alkaline batteries (supplied by you). (page 10) Reload the batteries properly. (page 10) Input the text you want to print. Re-import the data. Symptom Printing is not clear. Printing is poor quality. Printing is too light. Possible Cause The print head is dirty. Battery power is low. Improper print density Any of the following can interfere with proper printing. • A disc printing surface that is not smooth and flat • A disc printing surface that has a design or lines printed on it • A disc printing surface that supports ink jet printing only Recommended Action Clean the print head. (page 46) Change to AC adaptor power or load a fresh set of batteries (supplied by you). (page 10) Adjust the print density. (page 45) Use a disc that meets the requirements described in the bundled "Printing Precautions" or at the following Internet URL. http://world.casio.com/ds/ media/ You can also try adjusting the print density to make it darker. (page 45) Cannot print. I can't input text. The ink ribbon cassette is not loaded properly. Battery power is low or the wrong type of batteries are loaded in the printer. The FUNCTION key has been pressed. Re-load the ink ribbon cassette properly. Change to AC adaptor power or load a fresh set of AA-size alkaline batteries (supplied by you). (page 10) Press ESC to cancel the FUNCTION key operation. 47 E