Casio CW-K85 User Guide - Page 14

Initializing Printer Memory You should initialize the memory of the printer before using it for the first time, after you have not used it for a long time, or if it fails to operate normally when you turn power on. Important! Initializing printer memory clears its memory of all input data. To initialize printer memory 1. Make sure that the printer is turned off. 2. While holding down the PRINT and ESC keys, press . Release first, but keep PRINT and ESC depressed until power turns on and a confirmation message appears on the display. 3. In response to the confirmation message that appears, press SET to ini- tialize the printer memory or ESC to abort. Data Error Whenever you turn on the printer, it performs an internal check of its memory and functions. If it finds a serious data problem, it will display the following message: DATA ERROR! INITIALIZE THE PRINTER! When this message appears, press any key. Next, in response to the "INITIALIZE? SET/ESC" message that appears, press SET to initialize printer memory (which deletes everything in memory) or ESC to clear the message without initializing. Powering Up and Selecting a Printing Mode Turning the printer on and off is as simple as pressing a button. After the printer powers up, you will need to select the type of operation you want to perform. To turn power on and off 1. Press the button to turn the printer on. • This turns on power and displays a main menu screen like the one shown below. • The selection boundary indicates the icon that is currently selected on the main menu. New data icon Stored data icon Last Data icon Selection boundary Currently selected function (icon) Shows the function of the currently selected icon E 12