Casio DT-X10 User Guide - Page 40
Green: Power on, Handheld Terminal mounted correctly - usb driver
UPC - 079767602307
View all Casio DT-X10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
1 USB Port 2 RS-232C Port 3 RS-422C Port 4 AC Adaptor Jack 5 Wall Mount Unit Fastening Plate 6 Terminal Detect Switch 7 IR Port 8 Power Contacts 9 Power Indicator Lamp 10 Communication Indicator Lamp 11 System Status Indicator Lamp 12 Power Switch 13 Desktop Unit 14 DIP Switches E-38 This port accepts connection of a USB cable for connection to a computer for transfer of system data and file data. Use of the USB port requires installation of a special driver on the PC. This port accepts connection of an RS-232C cable for connection to a computer for transfer of system data and file data. Use of the RS-232C port requires installation of a special driver on the PC. This port is used when connecting to another Bridge Satellite Cradle. Connect the AC adaptor here. The holes in this plate accept screws that secure the wall mount unit in place. This switch detects when the Handheld Terminal is not seated correctly on the Bridge Satellite Cradle. This port transfers data with the Handheld Terminal IR port noncontact data communication. Power is supplied to the Handheld Terminal via these contacts. This lamp indicates the Power Status and the mounting status of the Handheld Terminal. Off: Power off Green: Power on, Handheld Terminal mounted correctly Red: Power on, Handheld Terminal not mounted This lamp shows when the Handheld Terminal is performing data communication. Off: No data communication being performed Green flashing: Data communication in progress Red: Problem with a connection between two Bridge Satellite Cradles This lamp indicates whether the system is operating normally. Regardless of whether or not a Handheld Terminal is mounted this lamp indicates the system status and whether or not a communication operation with the system can be performed. Off: System is not operating. Green: System is operating. Turns the power on and off. This is the base when using the Bridge Satellite Cradle in a desktop configuration. Remove the desktop unit in the case of a wall-mount configuration. Use these switches to configure the Bridge Satellite Cradle as required. DT-X10_E_P37_52.p65 38 05.4.1, 11:04 AM