Cisco SPA2102 Administration Guide - Page 168

ATA Voice Field Reference Line page B Reply 182 On Call Waiting Use Anonymous with RPID Use Local Addr in FROM When this feature is enabled, your ATA device replies with a SIP 182 response to the caller if it is already in a call and the phone is off-hook. To use this feature, select yes. Otherwise, keep the default, no. This field is found on the SPA2102, SPA3102, SPA8800 only. When set to yes, use "anonymous" in the SIP message when remote party ID is requested in the SIP message. This field is found on the SPA2102 only. Default is yes. The IP address of the local address enclosed in the FROM of the SIP message. This field is found on the SPA2102 only. Default is no. Voice tab > Line page > Call Feature Settings section On the SPA8800, these settings are configured on the Phone pages only. Blind Attn-Xfer Enable Enables the ATA device to perform an attended transfer operation by ending the current call leg and performing a blind transfer of the other call leg. If this feature is disabled, the ATA device performs an attended transfer operation by referring the other call leg to the current call leg while maintaining both call legs. To use this feature, select yes. Otherwise, select no. MOH Server Conference Bridge URL The default is no. User ID or URL of the auto-answering streaming audio server. When only a user ID is specified, the current or outbound proxy is contacted. Music-on-hold is disabled if the MOH Server is not specified. This feature supports external conference bridging for nway conference calls (n > 2), instead of mixing audio locally. To use this feature, set this parameter to that of the server's name, for example, [email protected]:12345 or conf (which uses the Proxy value as the domain). This field is found on the SPA2102 and PAP2T only. Cisco Small Business ATA Administration Guide 168