Cisco SPA2102 Administration Guide - Page 91
Using the IVR with an SAS Line, Power on the ATA device.
View all Cisco SPA2102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Configuring Music on Hold Configuring a Streaming Audio Server g. Close the window for the Telephone Configuration page. h. Repeat this step to configure each phone, as needed. 5 Using the IVR with an SAS Line The IVR can still be used on an SAS line, but the user needs to follow the following steps: STEP 1 Power off the ATA device. STEP 2 Connect a phone to the port and make sure the phone is on-hook. STEP 3 Power on the ATA device. STEP 4 Pick up handset and press * * * * to invoke IVR in the usual way. If the ATA device boots and finds that the SAS line is on-hook, it does not remove battery from the line so that IVR may be used. But if the ATA device boots up and finds that the SAS line is off-hook, it removes battery from the line because no audio session is in progress. Cisco Small Business ATA Administration Guide 91