Cisco SPA509G Administration Guide - Page 218
Configuring the Cisco SPA500S, Configuring the Cisco SPA500S Attendant Console
View all Cisco SPA509G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 218 highlights
Configuring the Cisco SPA500S Attendant Console Setting Up the Cisco SPA500S Attendant Console 9 STEP 1 Add a context in the extensions.conf file. STEP 2 Add a Subscribecontext command to point to the context in the sip.conf file. STEP 3 Configure the Cisco SPA500S to register with the Asterisk server (see "Configuring the Cisco SPA500S" section on page 217. The following example context uses "home" for extension 3500. This is entered in the file extensions.conf: [home] exten => 3500,1,Dial(SIP/3500) exten => 3500,hint,SIP/3500 exten => 3500,2,Voicemail,u3500 exten =>3500,1,3,hangup ... In the following example, extension 3500 is used to add Subscribecontext to point to the context. This is entered in the file sip.conf: [3500] type=friend secret=3500 callerid="spa3500" nat=no context=home mailbox=3500 Subscribecontext=home ... ... Configuring the Cisco SPA500S Complete the configuration required for the extensions on your IP PBX and obtain the following information: • IP PBX IP address or other hostname • Phone extension numbers To configure the Cisco SPA500S: NOTE Steps 1 through 4 are only required when the Server Type field is set to SPA9000. These steps are not required for other server types such as BroadSoft and Asterisk. Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 217