Cisco SPA509G Administration Guide - Page 325

Cisco SPA IP Phone Field Reference Attendant Console Status B Parameter Description BLF List URI Automatically configures BLF subscriptions for all users on a monitored list. See Configuring BroadSoft Busy Lamp Field Auto-Configuration, page 222. Unit 1 Key 1-32 Enter a strings that define the extension and other parameters associated with each lighted button on the first Cisco SPA500S unit. Keywords and values are case-sensitive. The configuration script is described in the "Unit/Key Configuration Scripts" section on page 218. Call Pickup Audio Notification By default, this parameter is set to No. If you set it to Yes, the phone plays the Call Pickup tone when there are incoming calls to any of the lines that the user is monitoring with the Call Pickup function. Use the following in your configuration file: Yes For more information, see Chapter 9, "Configuring the Cisco SPA500S Attendant Console.". Unit 2 See the description for Unit 1 above. Enter a strings that define the extension and other parameters associated with each lighted button on the second Cisco SPA500S unit. Keywords and values are case-sensitive. The configuration script is described in the "Setting Up the Cisco SPA500S Attendant Console" section on page 214. Attendant Console Status This page provides two tabs to display the status of up to two Cisco SPA500S units that are supported by a single IP phone: • Unit 1-Displays information about the first Cisco SPA500S unit. • Unit 2-Displays information about the second Cisco SPA500S unit. Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 324