Cisco WRVS4400N Administration Guide - Page 52
Configuring Local Area Network (LAN) Settings, Setup > LAN Setup, Local IP Address
UPC - 745883574797
View all Cisco WRVS4400N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Setting Up and Configuring the WRVS4400N Wireless-N Router Setting Up Your Wireless-N Router 5 Configuring Local Area Network (LAN) Settings The Setup > LAN Setup window displays the router's local network settings for the four Ethernet ports. To configure the LAN settings for the router, follow these steps: STEP 1 Click Setup > LAN Setup. STEP 2 Configure the LAN settings: • IPv4-This section displays the settings for the router's local IPv4 address and subnet mask. In most cases, you can use the default values. - Local IP Address-Enter the IPv4 address on the LAN side. The default value is 192.168.1.1. - Subnet Mask-Select the subnet mask from the drop-down menu. The default value is 255.255.255.0. - IP Reserved for Internal Usage-Enter a value between 1 and 254 to specify the IP address to use internally. Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 52