Cisco WS-C4928-10GE Installation Guide

Cisco WS-C4928-10GE Manual

Get Cisco WS-C4928-10GE PDF manuals and user guides View all Cisco WS-C4928-10GE manuals
Add to My Manuals
Save this manual to your list of manuals

Cisco WS-C4928-10GE manual content summary:

  • Cisco WS-C4928-10GE | Installation Guide - Page 1
    Catalyst 4900 Series Switch Installation Guide August 2008 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text Part Number: 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 2
    it is not installed in accordance with Cisco's installation instructions, it may cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B digital device in accordance with the specifications in part 15 of the FCC rules
  • Cisco WS-C4928-10GE | Installation Guide - Page 3
    in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0807R) Catalyst 4900 Series Switch Installation Guide Copyright © 2008 Cisco Systems, Inc. All rights reserved.
  • Cisco WS-C4928-10GE | Installation Guide - Page 4
  • Cisco WS-C4928-10GE | Installation Guide - Page 5
    Catalyst 4928-10GE Switch Software Features 1-4 Hardware System Features 1-6 Switch Components 1-7 Traffic Ports on the Catalyst 4948 1-7 Traffic Ports on the Catalyst 4948-10GE 1-7 Traffic Ports on the Catalyst 4928-10GE 1-7 Console Port 1-7 Front Panel LEDs 1-9 Chassis Cooling 1-11 Power Supplies
  • Cisco WS-C4928-10GE | Installation Guide - Page 6
    5-1 Getting Started 5-2 Problem Solving to the System Component Level 5-2 Identifying Startup Problems 5-3 LED Readings 5-3 Troubleshooting the Power Supply 5-5 Contacting Customer Service 5-6 Specifications A-1 Console Port A-1 Catalyst 4900 Series Switch Installation Guide vi 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 7
    D I X Management Port A-2 Catalyst 4900 Series Switch Specifications A-3 Initial Configuration for the Switch B-1 Connecting to the Switch B-2 Starting the Terminal-Emulation Software B-3 Connecting to a Power Source B-3 Entering the Initial Configuration Information B-4 IP Settings B-4 Performing
  • Cisco WS-C4928-10GE | Installation Guide - Page 8
    A Warning for Hungary C-51 Statement 294-Class A Warning for Korea C-51 Statement 257-Class A Notice for Taiwan and Other Traditional Chinese Markets C-52 Statement 371-Power Cable and AC Adapter C-52 Catalyst 4900 Series Switch Installation Guide viii 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 9
    This preface describes the audience, organization, and conventions of the Catalyst 4900 Series Switch Installation Guide and provides information on how to obtain related documentation. Audience Only trained and qualified service personnel (as defined in IEC60950-1 and AZ/NZS 60950-1) should
  • Cisco WS-C4928-10GE | Installation Guide - Page 10
    documents appropriate for your software release: • Catalyst 4500 Series Switch Cisco IOS Software Configuration Guide http://www.cisco.com/en/US/products/hw/switches/ps4324/products_install ation_and_configuration_guides_list.html • Catalyst 4500 Series Switch Cisco IOS Command Reference http://www
  • Cisco WS-C4928-10GE | Installation Guide - Page 11
    . Note Means reader take note. Tip Means the following information will help you solve a problem. Caution Means reader be careful. In this situation, you might perform an action that could result in equipment damage or loss of data. 78-18039-02 Catalyst 4900 Series Switch Installation Guide xi
  • Cisco WS-C4928-10GE | Installation Guide - Page 12
    in bodily injury. Statement 1071-Warning Definition Warning IMPORTANT SAFETY INSTRUCTIONS This warning symbol means danger. You are in a . Use the statement number provided at the end of each warning to locate its translation in Catalyst 4900 Series Switch Installation Guide xii 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 13
    éro de l'instruction situé à Ende jeder Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden. BEWAHREN SIE DIESE HINWEISE GUT AUF. 78-18039-02 Catalyst 4900 Series Switch Installation Guide
  • Cisco WS-C4928-10GE | Installation Guide - Page 14
    da instrução fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham este dispositivo. GUARDE ESTAS INSTRUÇÕES Catalyst 4900 Series Switch Installation Guide xiv 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 15
    som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning. SPARA DESSA ANVISNINGAR 78-18039-02 Catalyst 4900 Series Switch Installation Guide xv
  • Cisco WS-C4928-10GE | Installation Guide - Page 16
    åelse af ulykker. Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen i de oversatte advarsler, der fulgte med denne enhed. GEM DISSE ANVISNINGER Catalyst 4900 Series Switch Installation Guide xvi 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 17
    Preface 78-18039-02 Catalyst 4900 Series Switch Installation Guide xvii
  • Cisco WS-C4928-10GE | Installation Guide - Page 18
    Preface xviii Catalyst 4900 Series Switch Installation Guide 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 19
    Preface 78-18039-02 Catalyst 4900 Series Switch Installation Guide xix
  • Cisco WS-C4928-10GE | Installation Guide - Page 20
    Preface Catalyst 4900 Series Switch Installation Guide xx 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 21
    in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0. 78-18039-02 Catalyst 4900 Series Switch Installation Guide
  • Cisco WS-C4928-10GE | Installation Guide - Page 22
    Preface xxii Catalyst 4900 Series Switch Installation Guide 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 23
    • Catalyst 4948 Switch Software Features, page 1-3 • Catalyst 4948-10GE and Catalyst 4928-10GE Switch Software Features, page 1-4 • Hardware System Features, page 1-6 • Hardware System Features, page 1-6 • Switch Components, page 1-7 78-18039-02 Catalyst 4900 Series Switch Installation Guide 1-1
  • Cisco WS-C4928-10GE | Installation Guide - Page 24
    100BASE-TX/1000BASE-T Ethernet ports. Figure 1-2 Catalyst 4948-10GE Switch 130083 PS1 PS2 FAN STATUS 1 16 17 32 33 Catalyst WS-C4948 10GE X2-1 X2-2 CON 48 MGT The Catalyst 4948-10GE switch has a 136-Gbps, nonblocking, full-duplex switching fabric, providing 102 million packets-per-second
  • Cisco WS-C4928-10GE | Installation Guide - Page 25
    W DC power supply provides fault-tolerance protection for the switch. See the "Connecting AC Power to the Switch" section on page 3-9. Catalyst 4948 Switch Software Features The following is an overview of Catalyst 4948 features: • Layer 2, Layer 3, and Layer 4 switching services • Support for 32
  • Cisco WS-C4928-10GE | Installation Guide - Page 26
    module - Performance management information - Embedded CiscoView support Catalyst 4948-10GE and Catalyst 4928-10GE Switch Software Features The following is an overview of Catalyst 4948-10GE features: • Layer 2, Layer 3, and Layer 4 switching services • Support for 55,000 MAC addresses for Layer
  • Cisco WS-C4928-10GE | Installation Guide - Page 27
    Chapter 1 Product Overview Catalyst 4948-10GE and Catalyst 4928-10GE Switch Software Features - Q-in-Q for EFM - Cisco Inter Switch Link (ISL) tagging on all ports • 16,000 multicast forwarding entries and 16,000 unicast forwarding entries • 1022 ingress policers and 1022 egress policers • 32,
  • Cisco WS-C4928-10GE | Installation Guide - Page 28
    family of switches using Catalyst 4500 series system software. The following is an overview of the Catalyst 4900 series hardware features: • (Catalyst 4948 and 4948-10GE) 48 10BASE-T/100BASE-TX/1000BASE-T Ethernet ports using RJ-45 interfaces. The following standards are supported: - IEEE 802
  • Cisco WS-C4928-10GE | Installation Guide - Page 29
    command media-type sfp | rj45 can be used to configure the media type for these ports in the switch software and to determine whether the SFP connector or the RJ-45 connector is used. The default is SFP. Traffic Ports on the Catalyst 4948-10GE There are 48 10/100/1000BASE-T Ethernet ports using RJ
  • Cisco WS-C4928-10GE | Installation Guide - Page 30
    Detailed View Catalyst WS-C4948 10GE X2-1 X2-2 CON MGT MGT port LED 130084 Figure 1-6 (Catalyst 4928-10GE) Management Port Detailed View Catalyst ME 4924 10GE 271711 CON MGMT 25 26 ENABLED 27 28 Management Port LED 29 ENABLED 30 Catalyst 4900 Series Switch Installation Guide 1-8 78
  • Cisco WS-C4928-10GE | Installation Guide - Page 31
    the operating state of the switch. • PS1 LED indicates the internal power supply status. • PS2 LED indicates the internal power supply status. • FAN LED indicates the fan tray status. • A link status LED is below the management port. 78-18039-02 Catalyst 4900 Series Switch Installation Guide 1-9
  • Cisco WS-C4928-10GE | Installation Guide - Page 32
    link-down state or not connected There are no blinking, red, or yellow states for this port Port is operational Port is disabled by user Power-on self-test indicates faulty port No signal detected or link configuration failure 1-10 Catalyst 4900 Series Switch Installation Guide 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 33
    the other is OFF the power supply is probably not plugged in. If it is red, the supply is either plugged in and not switched on or it is faulty. It may be necessary to use the CLI for further status information. Chassis Cooling Note For environmental specifications, see Chapter 2, "Site Planning
  • Cisco WS-C4928-10GE | Installation Guide - Page 34
    130085 Switch Components Chapter 1 Product Overview Figure 1-8 Airflow (Catalyst 4948-10GE shown) PS1 PS2 FAN STATUS 1 16 17 32 33 Catalyst WS-C4948 10GE X2-1 X2-2 CON 48 MGT There are four fans in the fan tray. If an individual fan fails, the other fans continue to run. Sensors monitor
  • Cisco WS-C4928-10GE | Installation Guide - Page 35
    system operation by resolving adverse environmental conditions prior to loss of operation. Each power supply monitors its own temperature and output voltages. The switch senses the operating condition of the power supply and reports status through software. 78-18039-02 Catalyst 4900 Series Switch
  • Cisco WS-C4928-10GE | Installation Guide - Page 36
    1 Product Overview Power Management for the Switch You can choose AC or DC power supplies for your switch. The Catalyst 4900 series switches support the following power supplies: • 300 W AC • 300 W DC A redundant power supply can be identified and diagnosed by a running system regardless of its
  • Cisco WS-C4928-10GE | Installation Guide - Page 37
    switch and contains these sections: • Site Environmental Requirements, page 2-1 • Site Power system overtemperature conditions. In addition, poor equipment placement can make chassis panels inaccessible and difficult to maintain. 78-18039-02 Catalyst 4900 Series Switch Installation Guide
  • Cisco WS-C4928-10GE | Installation Guide - Page 38
    of other equipment. Appendix A, "Specifications," lists the operating and nonoperating environmental site requirements for the switches. To maintain normal operation and ensure high system availability, maintain an ambient temperature and EMI-free and continuous power at your site. The environmental
  • Cisco WS-C4928-10GE | Installation Guide - Page 39
    site for the switch installation: Caution The total maximum load on each AC-input power circuit must be within the rating of the wiring and breaker. An overload of input power can result if this requirement is not met. Warning Read the installation instructions before connecting the system to the
  • Cisco WS-C4928-10GE | Installation Guide - Page 40
    distribution system needed to support the switches. Heat dissipation is an important consideration for sizing the air-conditioning requirements for an installation. Refer to Appendix A, "Specifications," for the power and heat ratings for a switch. Catalyst 4900 Series Switch Installation Guide
  • Cisco WS-C4928-10GE | Installation Guide - Page 41
    power to the switch with the appropriate AC power cord for your location. Table 2-1 lists the power cords that are used with the AC power supply. Table 2-1 AC-Input Power Cord Options Locale Part Number 300 W AC Power Supply 120357 78-18039-02 Catalyst 4900 Series Switch Installation Guide 2-5
  • Cisco WS-C4928-10GE | Installation Guide - Page 42
    2 Site Planning Table 2-1 Locale Italy AC-Input Power Cord Options (continued) Part Number CAB-C2316-C15-IT system with number 6 AWG wire. The grounding connectors are on the right side of the chassis, and either one may be used. (See Figure 2-1.) Catalyst 4900 Series Switch Installation Guide
  • Cisco WS-C4928-10GE | Installation Guide - Page 43
    pads 130180 PS1 PS2 FAN STATUS 1 16 17 32 33 Catalyst WS-C4948 10GE X2-1 X2-2 CON 48 MGT Safety Overview This section provides safety information that you should read and understand to ensure a safe switch installation. Ensuring Safety Follow these guidelines to ensure your safety and
  • Cisco WS-C4928-10GE | Installation Guide - Page 44
    Note To completely de-energize the system, unplug the power cord. • Always use caution when lifting heavy equipment. See the "Lifting the Chassis Safely" section on page 3-5 before lifting the switch. • Always turn all power supplies off by unplugging all power cords before installing or removing
  • Cisco WS-C4928-10GE | Installation Guide - Page 45
    carefully for possible hazards such as moist floors, ungrounded power extension cables, and missing safety grounds. Preventing Electrostatic the switch. Completing each activity helps to ensure a successful switch installation. 78-18039-02 Catalyst 4900 Series Switch Installation Guide 2-9
  • Cisco WS-C4928-10GE | Installation Guide - Page 46
    Power evaluation: Input power type Receptacle proximity to the equipment Dedicated (separate) circuits for redundant power supplies UPS for power failures EMI evaluation: Distance limitations for signaling Site wiring RFI levels 2-10 Catalyst 4900 Series Switch Installation Guide 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 47
    install the Catalyst 4900 series switch. For first-time installations, perform the procedures in the following sections in the order listed. • Verifying the Contents, page 3-1 • Rack-Mounting the Switch, page 3-2 • Connecting AC Power to the Switch, page 3-9 • Connecting DC Power to the Switch, page
  • Cisco WS-C4928-10GE | Installation Guide - Page 48
    Switch hardware and software system and components. Caution This unit is meant to be rack-mounted, and is not intended to bear more than its own weight. Do not stack more than two on a table top, the added weight may damage the bottom chassis. Catalyst 4900 Series Switch Installation Guide
  • Cisco WS-C4928-10GE | Installation Guide - Page 49
    or servicing the unit in the rack. Statement 1006 Rack-Mounting Guidelines Before rack-mounting the switch, ensure is constructed to support the weight and dimensions of the chassis. For physical specifications, see Appendix A, "Specifications." - We Catalyst 4900 Series Switch Installation Guide 3-3
  • Cisco WS-C4928-10GE | Installation Guide - Page 50
    obstruct the airflow through the chassis or impair access to the power supplies or switching modules. Route cables away from field-replaceable components to avoid disconnecting cables unnecessarily for equipment maintenance or upgrades. - Allow at least 3 to 4 feet (91.4 to 121.9 cm) of clearance
  • Cisco WS-C4928-10GE | Installation Guide - Page 51
    accommodate power sources and network connections. Whenever you lift a chassis or any heavy object, follow these guidelines: • Ensure that your footing is solid, and balance the weight of screwdriver • Antistatic mat or antistatic foam 78-18039-02 Catalyst 4900 Series Switch Installation Guide 3-5
  • Cisco WS-C4928-10GE | Installation Guide - Page 52
    with the system The following tools and equipment are required to install the chassis in a rack: • Rack-mount kit • Tape measure and level Rack-Mounting the Switch Note The illustrations shown are of a Catalyst 4948-10GE switch. The process for the Catalyst 4948 and Catalyst 4928-10GE is identical
  • Cisco WS-C4928-10GE | Installation Guide - Page 53
    the L Brackets to the Switch 130086 PS1 PS2 FAN STATUS 1 16 17 32 33 Catalyst WS-C4948 10GE X2-1 X2-2 CON 48 MGT Step 3 Install the chassis in the rack as: a. Position the chassis in the rack as follows (see Figure 3-3): 78-18039-02 Catalyst 4900 Series Switch Installation Guide 3-7
  • Cisco WS-C4928-10GE | Installation Guide - Page 54
    tape measure and level to ensure that the chassis is installed straight and level. Figure 3-3 Installing the Switch in the Rack 130087 PS1 PS2 FAN STATUS 1 16 17 32 33 Catalyst WS-C4948 10GE X2-1 X2-2 CON 48 MGT Step 4 Attach the cable guide to the right or left side of the chassis mount
  • Cisco WS-C4928-10GE | Installation Guide - Page 55
    Installing the Switch Connecting AC Power to the Switch Figure 3-4 Installing the Cable Guide 130089 PS1 PS2 FAN STATUS 1 16 17 32 33 Catalyst WS-C4948 10GE X2-1 X2-2 CON 48 MGT Step 5 Do not connect the power cord at this time. Proceed to the "Connecting AC Power to the Switch" section
  • Cisco WS-C4928-10GE | Installation Guide - Page 56
    be set to off while the power supply is plugged in, or the power supply may be defective and not providing DC power to the switch. There may also be a fan failure. • The PS1 or PS2 LED is off when there is no power supply installed. 3-10 Catalyst 4900 Series Switch Installation Guide 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 57
    for your software release. If the LEDs or show power command indicate a power or other system problem, see Chapter 5, "Troubleshooting the Installation," for troubleshooting information. Connecting DC Power to the Switch Follow these steps and warnings when connecting DC power to the Catalyst 4900
  • Cisco WS-C4928-10GE | Installation Guide - Page 58
    DC Power Supply DC input terminals Handle 120697 Status LEDs Step 4 Connect the positive and negative power cables into the power supplies using a number 2 Phillips screwdriver. Note The DC power cables may use AWG #10 to AWG #12 wire. 3-12 Catalyst 4900 Series Switch Installation Guide 78
  • Cisco WS-C4928-10GE | Installation Guide - Page 59
    command, see the command reference publication for your software release. If the LEDs or show power command indicate a power or other system problem, see Chapter 5, "Troubleshooting the Installation," for troubleshooting information. 78-18039-02 Catalyst 4900 Series Switch Installation Guide 3-13
  • Cisco WS-C4928-10GE | Installation Guide - Page 60
    Connecting DC Power to the Switch Chapter 3 Installing the Switch 3-14 Catalyst 4900 Series Switch Installation Guide 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 61
    Wiring The Catalyst 4948 switches have four ports that can be configured with any combination of SFP modules with LC connectors, as shown in Figure 4-2. The interface configuration mode command media-type sfp|rj45 can be used to configure the media type for these ports in the switch software and
  • Cisco WS-C4928-10GE | Installation Guide - Page 62
    4948) Catalyst 4948 113146 CON AUX 45 46 47 48 X2 Modules You must connect the cables and install the X2 modules as shown in Figure 4-2 and Figure 4-3. More general installation information is in the 10-Gigabit Ethernet X2 Transceiver Installation Note at the following location: http://www.cisco
  • Cisco WS-C4928-10GE | Installation Guide - Page 63
    to the X2 Module Catalyst WS-C4948 10GE X2-1 X2-2 CON MGT 130088 If a module designed for operation on an SMF cable is directly coupled to an MMF cable, an effect known as Differential Mode Delay (DMD) might occur. See the Catalyst 4500 Series Module Installation Guide for more information
  • Cisco WS-C4928-10GE | Installation Guide - Page 64
    Chapter 4 Transceiver Modules Figure 4-3 Installing the 10-Gigabit Ethernet X2 Module Catalyst WS-C4948 10GE CON X1 MGT LINK X2 Catalyst WS-C4948 10GE CON X1 MGT X2 130091 Caution If you attempt to insert the bottom X2 module with the cooling fins pointing up, you will probably
  • Cisco WS-C4928-10GE | Installation Guide - Page 65
    the end of the fiber core can degrade the performance of the connector interface where the two cores meet. Therefore, the connector must be precisely aligned, and the connector interface must be absolutely free of trapped foreign material. 78-18039-02 Catalyst 4900 Series Switch Installation Guide
  • Cisco WS-C4928-10GE | Installation Guide - Page 66
    a cleaning kit to clean the ferrule, the protective white tube around the fiber, and the end-face surface of the fiber. As a general rule, whenever there is a significant, unexplained directly with optical instruments. Statement 1051 Catalyst 4900 Series Switch Installation Guide 4-6 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 67
    the manufacturer and connected to the adapters in the proper manner. The operation of the system should be error free if the customer provides clean connectors on the application side, follows the or while you are cleaning the chassis. 78-18039-02 Catalyst 4900 Series Switch Installation Guide 4-7
  • Cisco WS-C4928-10GE | Installation Guide - Page 68
    Cleaning the Fiber-Optic Connectors Chapter 4 Transceiver Modules Catalyst 4900 Series Switch Installation Guide 4-8 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 69
    switch hardware installation and contains these sections: • Getting Started, page 5-2 • Problem Solving to the System Component Level, page 5-2 • Identifying Startup Problems, page 5-3 • Troubleshooting the Power Supply, page 5-5 • Contacting Customer Service, page 5-6 If your system has problems
  • Cisco WS-C4928-10GE | Installation Guide - Page 70
    are supplying power to the system. • The system fan assembly is operating. • System software boots successfully. If all of these conditions are met and the hardware installation is complete, refer to the Software Configuration Guide and the Command Reference publications to troubleshoot the software
  • Cisco WS-C4928-10GE | Installation Guide - Page 71
    Identifying Startup Problems Identifying Startup Problems When you connect the power cords to the switch, follow these steps: Step 1 Step 2 Step 3 Step 4 Flip the power switches to the on position (AC powered systems only). Verify that power is available to the power supplied from the
  • Cisco WS-C4928-10GE | Installation Guide - Page 72
    Startup Problems Chapter 5 Troubleshooting the Installation Table 5-1 Power Supply LED Meanings LED and Color INPUT OK (AC) Green Red Off INPUT OK (DC) Green Red Off OUTPUT OK Green Meaning This LED should turn green immediately when power is applied to the supply and the power switch is
  • Cisco WS-C4928-10GE | Installation Guide - Page 73
    fails to light when the switch is connected to a different power source with a new power cord, the power supply is probably faulty. If you are unable to resolve the problem, contact a customer service representative for instructions. 78-18039-02 Catalyst 4900 Series Switch Installation Guide 5-5
  • Cisco WS-C4928-10GE | Installation Guide - Page 74
    Contacting Customer Service Chapter 5 Troubleshooting the Installation Contacting Customer Service If you are unable to solve a startup problem after using the troubleshooting suggestions in this chapter, contact a customer service representative for assistance and further instructions. Before you
  • Cisco WS-C4928-10GE | Installation Guide - Page 75
    X This appendix provides cable and technical specifications for the Catalyst 4900 series switches. Console Port The console port is an request to send data terminal ready transmit data - - receive data data set ready clear to send 78-18039-02 Catalyst 4900 Series Switch Installation Guide A-1
  • Cisco WS-C4928-10GE | Installation Guide - Page 76
    Management Port Appendix A Specifications Management Port The 10/100BASE-T (Catalyst 4948) or 10/100/1000BASE-T (Catalyst 4948-10GE) management port use an RJ-45 receptacle with a Link Status LED. Table A-2 lists the 10/100BASE-T port pinouts. Table A-2 10/100BASE-T Port Pinouts Pin Signal 1
  • Cisco WS-C4928-10GE | Installation Guide - Page 77
    4948-10GE) 256-MB SDRAM, 64-MB Flash, 256 bytes serial EEROM (all fixed and not upgradeable) 1.75 x 17.5 x 16 in. (4.5 x 44.5 x 40.6 cm) 17.5 lb (7.9 kg) for a system with two power supplies, 2.0 lb (0.9 kg) per power supply Sides in, rear out 85 VAC 78-18039-02 Catalyst 4900 Series Switch
  • Cisco WS-C4928-10GE | Installation Guide - Page 78
    4900 Series Switch Specifications Appendix A Specifications Table A-4 Catalyst 4900 Series Switch Specifications (continued) Item Power supply output AC-input AC frequency Output current Peak current Inrush value Output voltage Input KVA rating DC Power Minimum input Power supply output DC
  • Cisco WS-C4928-10GE | Installation Guide - Page 79
    Software, page B-3 3. Connecting to a Power Source, page B-3 4. Entering the Initial Configuration Information, page B-4 Note If you are using a DC power supply, see the "Connecting DC Power to the Switch" section on page 3-11 for more information about setting up your switch with a DC power supply
  • Cisco WS-C4928-10GE | Installation Guide - Page 80
    , or attach an appropriate adapter to the terminal. Figure B-1 Connecting a Switch to a PC 1 PS1 PS2 FAN STATUS 1 16 17 32 33 Catalyst 4948 CON 48 MGT 45 46 47 48 3 2 181874 1 Switch 2 Laptop 3 RJ-45-to-DB-9 adapter cable Catalyst 4900 Series Switch Installation Guide B-2 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 81
    DC Power to the Switch" section on page 3-11 for instructions on how to install the DC power supply. 78-18039-02 As the switch powers on, it begins the POST, a series of tests that runs automatically to ensure that the switch functions properly. Catalyst 4900 Series Switch Installation Guide B-3
  • Cisco WS-C4928-10GE | Installation Guide - Page 82
    fatal. Call Cisco Systems if your switch does not pass POST. If you started the terminal-emulation program before you powered on your switch, the PC or terminal displays the bootloader sequence. Press Enter to display the setup program prompt. Entering the Initial Configuration Information To set
  • Cisco WS-C4928-10GE | Installation Guide - Page 83
    system contact using this command. Switch1(config)# banner motd c 170 West Tasman Drive, San Jose, CA c or Switch1 (config)# banner motd c 170 West Tasman Drive, San Jose, CA; Tech Support 408 123 4567 c Configure an enable secret password, and press Return. 78-18039-02 Catalyst 4900 Series Switch
  • Cisco WS-C4928-10GE | Installation Guide - Page 84
    Switch1 (config-if)# exit Step 12 Exit from global configuration mode: Switch (config)# exit Switch # Step 13 View the configuration you just created and confirm that it is what you route commands. Switch1# show ip interface brief Catalyst 4900 Series Switch Installation Guide B-6 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 85
    at the Switch> prompt through the console port by using a terminal program or through the network by using Telnet. For configuration information, refer to the switch software configuration guide or the switch command reference. 78-18039-02 Catalyst 4900 Series Switch Installation Guide B-7
  • Cisco WS-C4928-10GE | Installation Guide - Page 86
    Entering the Initial Configuration Information Appendix B Initial Configuration for the Switch Catalyst 4900 Series Switch Installation Guide B-8 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 87
    that accompanied this device. Statement 1071 SAVE THESE INSTRUCTIONS This document includes the following sections: • Translated Safety Warnings, page C-2 • Regulatory Standards Compliance, page C-39 • European Directives, page C-42 78-18039-02 Catalyst 4900 Series Switch Installation Guide C-1
  • Cisco WS-C4928-10GE | Installation Guide - Page 88
    guide. Statement 1003-DC Power Disconnection Warning Before performing any of the following procedures, ensure that power Attention Avant de pratiquer l'une quelconque des procédures ci-dessous, vérifier que le circuit en courant continu Catalyst 4900 Series Switch Installation Guide C-2 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 89
    DC. Advarsel Før du udfører nogen af følgende procedurer, skal du sikre dig, at der ikke er strøm til jævnstrømskredsløbet. 78-18039-02 Catalyst 4900 Series Switch Installation Guide C-3
  • Cisco WS-C4928-10GE | Installation Guide - Page 90
    Statement 1004-Installation Instructions Warning Read the installation instructions before connecting the system to the power source. Statement 1004 installationsanvisningarna innan du kopplar systemet till strömförsörjningsenheten. Catalyst 4900 Series Switch Installation Guide C-4 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 91
    Appendix C Compliance Information and Translated Safety Warnings Translated Safety Warnings 78-18039-02 Catalyst 4900 Series Switch Installation Guide C-5
  • Cisco WS-C4928-10GE | Installation Guide - Page 92
    the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in the rack. Statement 1006 Waarschuwing Om lichamelijk letsel te voorkomen telineeseen tai sen huoltamista siinä. Catalyst 4900 Series Switch Installation Guide C-6 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 93
    cautions spéciales afin de maintenir la stabilité du système. Les directives ci-dessous sont destinées à assurer la protection du personnelþ: • Si cette treffen, um sicherzustellen, daß das System stabil bleibt. Die folgenden Richtlinien sollen zur Catalyst 4900 Series Switch Installation Guide C-7
  • Cisco WS-C4928-10GE | Installation Guide - Page 94
    en la parte inferior. • Si el bastidor dispone de dispositivos estabilizadores, instalar éstos antes de montar o proceder al mantenimiento del equipo instalado en el bastidor. Catalyst 4900 Series Switch Installation Guide C-8 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 95
    dar manutenção à unidade existente. Advarsel For at forhindre legemesbeskadigelse ved montering eller service af denne enhed i et rack, skal du sikre at systemet står stabilt for enheden monteres eller serviceres i racket. 78-18039-02 Catalyst 4900 Series Switch Installation Guide C-9
  • Cisco WS-C4928-10GE | Installation Guide - Page 96
    Translated Safety Warnings Appendix C Compliance Information and Translated Safety Warnings • • • • • • C-10 Catalyst 4900 Series Switch Installation Guide 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 97
    Learn is a service mark of Cisco Systems, Inc.; and Access Registrar, Aironet, BPX, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, Cisco, the Cisco Certified Internetwork Expet logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Enterprise
  • Cisco WS-C4928-10GE | Installation Guide - Page 98
    Translated Safety Warnings Appendix C Compliance Information and Translated Safety Warnings C-12 Catalyst 4900 Series Switch Installation Guide 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 99
    Appendix C Compliance Information and Translated Safety Warnings Translated Safety Warnings 78-18039-02 Catalyst 4900 Series Switch Installation Guide C-13
  • Cisco WS-C4928-10GE | Installation Guide - Page 100
    Translated Safety Warnings Appendix C Compliance Information and Translated Safety Warnings Statement 1008-Class 1 Laser Product Warning Class 1 laser product. Statement 1008 Waarschuwing Klasse-1 laser produkt. C-14 Catalyst 4900 Series Switch Installation Guide 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 101
    laser de classe 1. ¡Advertencia! Producto láser Clase I. Varning! Laserprodukt av klass 1. Aviso Produto a laser de classe 1. Advarsel Klasse 1 laserprodukt. Translated Safety Warnings 78-18039-02 Catalyst 4900 Series Switch Installation Guide C-15
  • Cisco WS-C4928-10GE | Installation Guide - Page 102
    yeux, ni l'observer directement à l'aide d'instruments optiques. Warnung Nicht direkt in den Strahl blicken und ihn nicht direkt mit optischen Geräten prüfen. C-16 Catalyst 4900 Series Switch Installation Guide 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 103
    ni observarlo directamente con instrumentos ópticos. Varning! Rikta inte blicken in mot strålen och titta inte direkt på den genom optiska instrument. 78-18039-02 Catalyst 4900 Series Switch Installation Guide C-17
  • Cisco WS-C4928-10GE | Installation Guide - Page 104
    restrito é uma área à qual apenas tem acesso o pessoal de serviço autorizado, que possua uma ferramenta, chave e fechadura especial, ou qualquer outra forma de segurança. C-18 Catalyst 4900 Series Switch Installation Guide 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 105
    ås adgang til et begrænset område ved at bruge et særligt stykke værktøj, lås og nøgle, eller en anden form for sikkerhed. 78-18039-02 Catalyst 4900 Series Switch Installation Guide C-19
  • Cisco WS-C4928-10GE | Installation Guide - Page 106
    Translated Safety Warnings Appendix C Compliance Information and Translated Safety Warnings C-20 Catalyst 4900 Series Switch Installation Guide 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 107
    als primäre Ausschaltvorrichtung dient. Avvertenza Il gruppo spina-presa deve essere sempre accessibile, poiché viene utilizzato come dispositivo di scollegamento principale. 78-18039-02 Catalyst 4900 Series Switch Installation Guide C-21
  • Cisco WS-C4928-10GE | Installation Guide - Page 108
    hace las veces de dispositivo de desconexión principal. Varning! Man måste alltid kunna komma åt stickproppen i uttaget, eftersom denna koppling utgör den huvudsakliga frånkopplingsanordningen. C-22 Catalyst 4900 Series Switch Installation Guide 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 109
    si è certi della disponibilità di un adeguato collegamento di messa a terra, richiedere un controllo elettrico presso le autorità competenti o rivolgersi a un elettricista. 78-18039-02 Catalyst 4900 Series Switch Installation Guide C-23
  • Cisco WS-C4928-10GE | Installation Guide - Page 110
    änd aldrig utrustningen utan en på lämpligt sätt installerad jordledning. Om det föreligger osäkerhet huruvida lämplig jordning finns skall elektrisk besiktningsauktoritet eller elektriker kontaktas. C-24 Catalyst 4900 Series Switch Installation Guide 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 111
    Avvertenza Questo apparato può essere installato, sostituito o mantenuto unicamente da un personale competente. Advarsel Bare opplært og kvalifisert personell skal foreta installasjoner, utskiftninger eller service på dette utstyret. 78-18039-02 Catalyst 4900 Series Switch Installation Guide C-25
  • Cisco WS-C4928-10GE | Installation Guide - Page 112
    equipe treinada e qualificada tem permissão para instalar, substituir ou dar manutenção a este equipamento. Advarsel Kun uddannede personer må installere, udskifte komponenter i eller servicere dette udstyr. C-26 Catalyst 4900 Series Switch Installation Guide 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 113
    dit product dient te geschieden in overeenstemming met alle nationale wetten en reglementen. Varoitus Tämä tuote on hävitettävä kansallisten lakien ja määräysten mukaisesti. 78-18039-02 Catalyst 4900 Series Switch Installation Guide C-27
  • Cisco WS-C4928-10GE | Installation Guide - Page 114
    estar de acordo com todas as leis e regulamentações nacionais. Advarsel Endelig bortskaffelse af dette produkt skal ske i henhold til gældende love og regler. C-28 Catalyst 4900 Series Switch Installation Guide 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 115
    Appendix C Compliance Information and Translated Safety Warnings Translated Safety Warnings 78-18039-02 Catalyst 4900 Series Switch Installation Guide C-29
  • Cisco WS-C4928-10GE | Installation Guide - Page 116
    de ce produit contre les courts-circuits (surtensions) doit être assurée par la configuration électrique du bâtiment. Vérifiez que l'installation a lieu uniquement en conformité as normas de instalação elétrica nacionais e locais. C-30 Catalyst 4900 Series Switch Installation Guide 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 117
    kræver beskyttelse mod kortslutning (overstrøm). Dette skal være en del elinstallationen i bygningen. Installation skal ske i overensstemmelse med nationale og lokale ledningsregler. 78-18039-02 Catalyst 4900 Series Switch Installation Guide C-31
  • Cisco WS-C4928-10GE | Installation Guide - Page 118
    Translated Safety Warnings Appendix C Compliance Information and Translated Safety Warnings C-32 Catalyst 4900 Series Switch Installation Guide 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 119
    Unterbrochene Fasern oder Steckerverbindungenkönnen unsichtbare Laserstrahlung abgeben. Blicken Sie weder mit bloßem Auge noch mit optischen Instrumenten direkt in Laserstrahlen. 78-18039-02 Catalyst 4900 Series Switch Installation Guide C-33
  • Cisco WS-C4928-10GE | Installation Guide - Page 120
    com instrumentos ópticos. Advarsel Usynlig laserstråling kan forekomme fra brugte fibre eller stik. Stir ikke ind i stråler eller direkte med optiske instrumenter. C-34 Catalyst 4900 Series Switch Installation Guide 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 121
    Appendix C Compliance Information and Translated Safety Warnings Translated Safety Warnings 78-18039-02 Catalyst 4900 Series Switch Installation Guide C-35
  • Cisco WS-C4928-10GE | Installation Guide - Page 122
    Sicherheitsstandards entsprechen. Avvertenza L'installazione dell'impianto deve essere conforme ai codici elettrici locali e nazionali. Advarsel Installasjon av utstyret må samsvare med lokale og nasjonale elektrisitetsforskrifter. C-36 Catalyst 4900 Series Switch Installation Guide 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 123
    Present on DC Power Terminals Warning Hazardous voltage or energy may be present on DC power terminals. Always replace cover when terminals are not in service. Be sure uninsulated zijn wanneer de afsluiting is geplaatst. 78-18039-02 Catalyst 4900 Series Switch Installation Guide C-37
  • Cisco WS-C4928-10GE | Installation Guide - Page 124
    . Veillez à toujours replacer le couvercle lors les terminaux ne sont pas en service. Assurez-vous que les conducteurs non isolés ne sont pas accessibles lorsque le att inga oisolerade ledare kan nås när höljet sitter på plats. C-38 Catalyst 4900 Series Switch Installation Guide 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 125
    , and NEBS standards. The Catalyst 4948, Catalyst 4948-10GE, and Catalyst 4928-10GE switches are in compliance with national and international standards as described in Table C-1. Table C-1 Class A Regulatory Standards Compliance Specification Regulatory Compliance Safety Standard Products
  • Cisco WS-C4928-10GE | Installation Guide - Page 126
    EMC, Safety, and Environmental Standards Specification NEBS Criteria Levels Verizon NEBS Compliance Standard SR-3580 NEBS level 3 (GRC-63-CORE issue 3, GR-1089-CORE , issue 4 Telecommunications Carrier Group (TCG) Checklist C-40 Catalyst 4900 Series Switch Installation Guide 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 127
    ) Specification Standard Caution Instructions Shielded cable grounded at both ends specified power service equipment (see definition in National Electric Code). The Catalyst 4900 Series Switches are designed for a Common Bonding Network (CBN) installation. The Catalyst 4900 Series Switches
  • Cisco WS-C4928-10GE | Installation Guide - Page 128
    Table C-3 GR-1089 Installation and Caution Instructions (continued) An electrical conducting path shall The DC return connection to this system should remain Isolated from the system frame and chassis (DC-I). The 1999/5/EF. C-42 Catalyst 4900 Series Switch Installation Guide 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 129
    1999/5/EC. Magyar [Hungarian]: Norsk Dette utstyret er i samsvar med de grunnleggende krav og andre relevante [Norwegian]: bestemmelser i EU-direktiv 1999/5/EF. 78-18039-02 Catalyst 4900 Series Switch Installation Guide C-43
  • Cisco WS-C4928-10GE | Installation Guide - Page 130
    ]: Statement 275-Declaration of Conformity with Regard to the Directives 73/23/EEC and 89/336/EEC as amended by Directive 93/68/EEC For specifics about which standards have been applied, refer to the Declaration of Conformity. C-44 Catalyst 4900 Series Switch Installation Guide 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 131
    satisfaz os requisitos essenciais e outras provisões das Directivas 73/23/EEC e 89/336/EEC, conforme amendados pela Directiva 93/68/EEC. 78-18039-02 Catalyst 4900 Series Switch Installation Guide C-45
  • Cisco WS-C4928-10GE | Installation Guide - Page 132
    the EMC Class A warnings for the Catalyst 4948 and Catalyst 4948-10GE switches. Class A Notice for FCC Modifying the equipment without Cisco's authorization may result in the equipment television communications at your own expense. C-46 Catalyst 4900 Series Switch Installation Guide 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 133
    radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in éventuellement prendre des mesures adéquates. 78-18039-02 Catalyst 4900 Series Switch Installation Guide C-47
  • Cisco WS-C4928-10GE | Installation Guide - Page 134
    . Varning! Detta är en klass A-produkt. Denna produkt kan orsaka radiostörningar inomhus. Det kan då vara ett krav att användaren vidtar lämpliga åtgärder. C-48 Catalyst 4900 Series Switch Installation Guide 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 135
    Appendix C Compliance Information and Translated Safety Warnings EMC Class A Notices and Warnings 78-18039-02 Catalyst 4900 Series Switch Installation Guide C-49
  • Cisco WS-C4928-10GE | Installation Guide - Page 136
    Council for Interference by Information Technology Equipment (VCCI). If this equipment is used in a domestic environment, radio disturbance may arise. When such trouble occurs, the user may be required to take corrective actions. C-50 Catalyst 4900 Series Switch Installation Guide 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 137
    should be aware of this. If this type was sold or purchased by mistake, it should be replaced with a residential-use type. 78-18039-02 Catalyst 4900 Series Switch Installation Guide C-51
  • Cisco WS-C4928-10GE | Installation Guide - Page 138
    in residential environment, it may cause radio frequency interference, under such circumstances, the user may be requested to take appropriate countermeasures. Statement 257 Statement 371-Power Cable and AC Adapter C-52 Catalyst 4900 Series Switch Installation Guide 78-18039-02
  • Cisco WS-C4928-10GE | Installation Guide - Page 139
    A-3 weight A-3 checklist, site planning 2-9 cleaning guidelines 4-7 console port 1-7 connecting to B-2 location 1-7 pinouts A-1 customer service 5-6 D dimensions, chassis A-3 documentation audience i-ix conventions i-xi organization i-ix related i-x Catalyst 4900 Series Switch Installation Guide
  • Cisco WS-C4928-10GE | Installation Guide - Page 140
    requirement, DC systems 2-6 H hardware description power supply 1-12 heat dissipation determining 2-4 I installation connecting to a power source B-3 IN-2 Catalyst 4900 Series Switch Installation Guide starting the terminal-emulation software B-3 installing the switch guidelines 3-2 lifting
  • Cisco WS-C4928-10GE | Installation Guide - Page 141
    cautions 2-3 software documentation i-x specifications AC Power A-3 DC Power A-4 environmental A-3 switching components A-3 startup sequence 5-3 status LED 1-10 system specifications A-1 T temperature thresholds 2-2 terminal-emulation software B-3 Catalyst 4900 Series Switch Installation Guide IN
  • Cisco WS-C4928-10GE | Installation Guide - Page 142
    Index traffic ports 1-7 troubleshooting contacting customer service 5-6 initial boot 5-2 methodology 5-2 power supply 5-4, 5-5 startup 5-3 typographical conventions i-xi W warnings translated safety C-2 weight chassis A-3 IN-4 Catalyst 4900 Series Switch Installation Guide 78-18039-02
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Tel:
408 526-4000
800 553-NETS (6387)
Fax:
408 527-0883
Catalyst 4900 Series Switch
Installation Guide
August 2008
Text Part Number: 78-18039-02