Clifford ACE 500 Owners Guide - Page 16
User-selectable features
View all Clifford ACE 500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
User-selectable features Your ACE 500 vehicle security system allows you to set many of its features to your own personal preferences. We have made the programming procedures very simple: to make a change, you just flick the valet switch a few times. The system comes from the factory with all of its features pre-programmed as noted in the table below and on the next page. To change any of the settings, use the following procedure. To restore the feature to its factory setting, just repeat the procedure: 1. Select the feature you wish to program from the table below and on the following page. Note the number of flicks and chirps. 2. Turn your vehicle's ignition switch to its "ON" position. 3. Immediately flick the valet switch back and forth, counting the number of chirps you hear. Stop when you reach the number of chirps associated with the feature you wish to program. 4. If noted, perform the "Secondary action." 5. Wait 3 seconds. You will hear 1-5 chirps (as noted in the "Program completion confirmation" column) and the LED will turn off. Turn the ignition off. 6. Repeat steps 1-5 for any other features you wish to program. Feature Factory setting # of flicks & chirps Secondary action Program completion confirmation Result AutoArming ON 4 AutoArm & Lock OFF 5 - 1 chirp = OFF Change state from 2 chirps = ON ON to OFF or vice-versa - 1 chirp = OFF Change state from 2 chirps = ON OFF to ON or vice-versa Chirp confirmation ON 6 - 1 chirp = OFF Change state from 2 chirps = ON ON to OFF or vice-versa QuietChirps OFF 7 Headlight Reminder ON 8 - 1 chirp = OFF Change state from 2 chirps = ON ON to OFF or vice-versa - 1 chirp = OFF Change state from 2 chirps = ON ON to OFF or vice-versa AutoLock & AutoUnLock ON 9 - 1 chirp = OFF Change state from 2 chirps = ON ON to OFF or vice-versa Siren duration 30 sec. 10 - 1 chirp=60sec Change duration from 30 to 2 chirps=30sec 60 seconds or vice-versa Tamper Warning OFF 11 - 1 chirp = OFF Change state from 2 chirps = ON ON to OFF or vice-versa FACT ON Add a new remote to channel 1 - (arm/disarm) 12 - 1 chirp = OFF Change state from 2 chirps = ON ON to OFF or vice-versa 13 Press remote control button 1 1 chirp Button 1/channel 1 code of the new remote control has been memorized continued . . . 15