Clifford ACE 500 Owners Guide - Page 9
What each button/channel does
View all Clifford ACE 500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
What each button/channel does Your ACE 500 remote controls come pre-programmed so that certain channels command certain functions. If you wish, you can actually assign any channel to any function (see pages 15-16). The following chart indicates what each remote control channel number does, and how to transmit each channel number. Transmitting channel number: 1 2 3 4 5 6 7 8 9 10 11 12 Factory settings of the 12 remote control channels Causes the system to: Press the How Press LevelShift many button button? times? number arm or disarm and lock or unlock the doors no - 1 optionally pop the trunk (if the system is disarmed) no - 2 silently arm or disarm no - 3 activate optional accessory function #1 no - 4 remotely enter or exit valet mode (see page 11) yes once 1 optionally turn on the headlights yes once 2 activate optional accessory function #2 yes once 3 activate optional accessory function #3 yes once 4 activate optional accessory function #4 yes twice 1 activate optional accessory function #5 yes twice 2 activate optional accessory function #6 yes twice 3 activate optional accessory function #7 yes twice 4 TO ARM Press button 1 (channel 1) once. You will hear two chirps and THE SYSTEM the parking lights will flash twice. The dashboard LED will flash repeatedly and the car doors will automatically lock. TO DISARM THE SYSTEM Press button 1 (channel 1) again. One chirp and one parking light flash confirms disarming. In addition, the doors will automatically unlock and the interior lights will turn on and stay on for 30 seconds or until you start the engine, whichever occurs first. TO SILENTLY Press button 3 (channel 3). The system will arm or disarm ARM OR DISARM . . . with all the indications noted above except the chirp acknowledgments. 8