Clifford ACE 500 Owners Guide - Page 18
Adding new remote controls
View all Clifford ACE 500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Example : To change the AutoArming feature from its factory setting of "on" to "off," you would do the following: • Turn the ignition key to the ON position. • Flick the valet switch back and forth 4 times (you'll hear a chirp each time to help you count to the total of 4 chirps). • Wait 3 seconds. The system will sound one more chirp to confirm that the AutoArming setting is now off (1 chirp = off, 2 chirps = on). • Turn the ignition off. That's all there is to it! To change the Adding new remote controls For other drivers in your family, or if you wish to control Clifford systems on your other cars with the same remote control, you can buy additional remote controls from any Clifford Dealer (or call our Customer Service Department at 800-824-3208) and program them into the system yourself. Each ACE 500 will respond to as many as four 12-channel ACG remote controls. To add a new remote control to the system, use the procedures noted in the User-selectable features section on pages 15-16. How to erase the codes of lost or stolen remote controls If one of your remote controls is ever lost or stolen, you can erase its digital codes from the system memory to make sure that the missing remote control can never be used to disarm your system. To do so, use the "Erase all channels" feature (see User-selectable features on pages 15-16). This will clear all remote control codes from the system memory. Then simply program each remaining and/or replacement remote control as noted in the Adding new remote controls section above. ACE 500 is covered by one or more of the following Clifford Electronics patents: 4,158,874; 4,233,642; 4,327,444; 4,383,242; 4,430,685; 4,845,464; 4,887,064; 4,890,108; 4,922,224; 4,997,053; 5,081,667; 5,146,215; 5,157,375; 5,467,070 and other patents pending © Copyright Clifford Electronics, Inc., 1996 31-718C/A5OM/896 17