Clifford Concept 550 Owners Guide - Page 12

the siren has been sounding, press on the transmitter to stop the trigger and return the unit to the armed state. The system will not dis- arm, but rather reset. This prevents you from disabling the system should you wish to silence it without visually checking the vehicle. After resetting the system, press again to disarm the system. transmitter chirp muting To temporarily turn off the arm or disarm chirps, use transmitter chirp muting. Simply press on the transmitter, and the confirmation chirp(s) will be eliminated for that one operation only. The parking lights will flash to confirm the arm/disarm command. If you want the arm/disarm chirps turned off permanently, please refer to the User- Selectable Features section of this guide. transmitter sensor disable To temporarily disable a sensor input, arm the system, press twice and then . The lights will flash four times and all warn away trigger zones one, three, and eight are bypassed. Press the buttons again; the lights flash four times and both warn away and full trigger zones one, three, and eight are bypassed until the system is disarmed. This can be performed anytime the system is armed. 1. Arm the system. 2. Press twice and then . 3. The lights will flash four times; all warn away zones are now bypassed. 4. Transmit the sensor bypass channel again. © 2004 directed electronics, inc. 9