Clifford Concept 550 Owners Guide - Page 15
transmitter valet mode, one-time auto-arming bypass, low battery warning
View all Clifford Concept 550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
transmitter valet mode The operations described in this section refer to transmitter buttons. Remember, the buttons used in all the instructions in this guide correspond to a Standard Configuration transmitter. This may not be how your transmitter is set up. To enter Valet Mode, press twice and then . The LED status indicator will light solid if you are entering Valet Mode, or will turn off if you are exiting Valet Mode. one-time auto-arming bypass This will bypass the auto arm feature once only. 1. With the key, turn the ignition on, then off within two seconds. 2. The siren will chirp once to confirm auto arming bypass. 3. The system will not auto arm. note: The system will revert to normal auto arming when the system sees the ignition on for at least three seconds. During auto arming bypass the system will not roll up the windows if SmartWindows is connected, and the accessory output will not autoactivate when using the remote to arm the system. low battery warning When the transmitter battery is low, the system will generate a lowpitched tone when disarmed. 12