Clifford Concept 550 Owners Guide - Page 13

5. The lights will flash four more times; the sensor warn away and full trigger zones are now bypassed. 6. The sensor zones will reset when disarmed. intellistart and smartwindows sensor bypass When the system sees a command to start the vehicle via the Intellistart, it bypasses sensor zones and will continue to bypass these zones until the remote start shuts down. When the system sees a SmartWindows command for up or down operation, the unit will automatically bypass sensor zones one, two, three, and eight until the windows complete their operation. auxiliary channel bypass Alarm sensor input zones one, three, and eight will be bypassed while a pulsed or timed auxiliary Output is active. panic mode with smart door locking If you are threatened in or near your vehicle, you can attract attention by triggering the system with your transmitter! Just press for two seconds to enter Panic Mode. The siren will sound and the park- ing lights will flash for the programmed duration. If the ignition is on, the doors will lock; if the ignition is off, the doors will unlock. To stop Panic Mode at any time press on the transmitter again. © 2004 directed electronics, inc.