Cobra 29 LTD CHR 29LTDCHR_MANL - Page 11

Operation To Transmit To Transmit Caution! Be sure the antenna is properly connected to the radio before transmitting. Prolonged transmitting without an antenna, or a poorly matched antenna, could cause damage to the transmitter. Be sure to read the F.C.C. Rules and Regulations included with this unit before transmitting. Setting Dynamike® 1 Select desired channel. Setting Dynamike® This controls the microphone sensitivity (outgoing audio level). Transmit Operation Transmit 1 Push and hold mic button to transmit.Transmitter is now activated.When transmitting, hold the microphone two inches from your mouth and speak in a clear, normal voice. Release to receive. Setting TalkBack TalkBack This control is used to adjust the desired amount of modulation talk back that is present at the speaker during transmit. At fully counter-clockwise position the talk back is off. 1 Initially, set fully clockwise so that maximum voice volume is available. Dynamike® may have to be reduced in some conditions. 20 21