Cobra 29 LTD CHR 29LTDCHR_MANL - Page 5
Operation
View all Cobra 29 LTD CHR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Operation Turning On Turning On Make sure the power cord, antenna and microphone are connected to their proper connectors before starting. Setting Channel Selector Operation Setting Channel Selector 1 The CB/PA button should be in the CB position. 1 Select one of forty channels and adjust volume. The selected channel is indicated by the LED readout directly above the channel selector knob 2 Rotate the On/Off Volume knob clockwise to a normal listening level. 8 9
The
CB/PA button should be in the
CB position.
Operation
9
Operation
Turning On
Setting Channel
Selector
8
Turning On
Make sure the power cord, antenna and
microphone are connected to their proper
connectors before starting.
Setting Channel Selector
2
1
Rotate the On/Off Volume knob
clockwise
to
a normal listening level.
Select
one of forty channels and adjust
volume. The selected channel is indicated by
the LED readout directly above the channel
selector knob
1