Cobra 29 LTD CHR 29LTDCHR_MANL - Page 8

Operation Selecting A Channel Selecting A Channel Operation NB-ANL/ANL/OFF (Noise Blanker/Automatic Noise Limiter) Switch NB-ANL/ANL/ OFF (Noise Blanker / Automatic Noise Limiter) Switch S-Meter 1 Switch to NOR to select desired channel. S-Meter Swings proportionately to strength of incoming signal when receiving. 1 When switched to ANL the Automatic Noise Limiter is activated. This helps reduce noise created by the vehicle's electronics. When switched to NB/ANL position the RF Noise Blanker is also activated, providing increased noise filtration. Note The RF noise blanker is very effective in reducing repetitive noises such as ignition interference. When switched to OFF position all noise filtration will be turned off. 1 The S/RF-SWR-CAL switch must be in the S/RF position to read the meter. 14 15