Coby CTP9050 Operation Guide - Page 9

Do the following: • Choose the best location • Connect the phone • Choose the dialing mode CHOOSING A LOCATION Away from VC Os and TV sets and other oloctronle equipment Away from hoot sources, ouch so rodlotoro, air ducla,and sunlight L Nor • control location and ono loyal surface Army from • mIcrowavo oven Anyhorn nolo. somassuch wok rind.by • shot wilh homyPolk Awry Sono poroonalcompubm Any from massing moisture, extremely low tempera tunas, dust, moohonlcal vibration. or shook Where you place the phone affects the reception quality of the handset: Away from another cordless telephone Place the base near an AC electrical outlet and near telephone line jack Place the base away from metal walls and metal file cabinets CAUTION: The cordless telephone operates at a frequency that may cause interference to nearby TVs and VCRs; the base phone should not be placed near, or on top of a iy or VCR. If interference is experienced, moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference. Note: While the 5.8GHz frequency is inherently clearer, we suggest that you do not use this phone within 20 feet of a working microwave. The microwave produces frequencies in this range which may cause interference. This interference is normal for all 5.8GHz phones and should not be considered a product defect. Connecting the Base 0 0 0 0 0 TELEPHONE SETUP 1. Connect the telephone line cord to the "LINE" jack and to a telephone outlet. 2. Connect the AC power adapter to the 9V DC jack and to an AC outlet. Note: Use only the supplied AC power adapter. Do not use any other AC power adapter. Connect the AC power adapter to a continuous power supply Place the phone close to the AC outlet so that you can plug in the AC power adapter easily Tip: If your telephone outlet is not modular, contact your telephone company for assistance. 7