Compaq 1700 Armada 1700 Family of Personal Computers Reference Guide - Page 90
Docking the Computer to the, Convenience Base, Windows 95 or Windows 98.
UPC - 743172505040
View all Compaq 1700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Docking the Computer to the Convenience Base 1. Shut Down the computer if you are using Windows NT. You do not need to turn off the computer if you are using Windows 95 or Windows 98. NOTE: Not all network operating systems support "hot docking" (while the computer is on). In order to establish a network connection, turn off the computer, then turn it on again while the computer is docked in the convenience base. 2. If configuring for a desktop system, Shut Down the computer and close the display. 3. Align the left edge of the computer with the left docking alignment guide on the convenience base. Push the computer in until the retaining latch 2 catches. 4. Push the docking lever 4 back until the docking connectors 1 are firmly joined and the computer is fully docked in the convenience base. 5. To configure for a desktop system,(a) place the Monitor Stand on top of the system, (b) place the external monitor on top of the stand, and (c) connect the external monitor, external keyboard, and mouse to the rear connectors on the convenience base. 6. Turn on all external devices connected to the convenience base. 7. Slide the power switch 3 on the computer, or press the power button on the convenience base. Docking the computer 8-4 Co2nnecting External Devices