Compaq 2230s HP Compaq 2230s Notebook PC - Maintenance and Service Guide - Page 57
Open the TouchPad cable ZIF connector, Remove the two Torx T8M2.5×6.0 slotted screws
View all Compaq 2230s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
5. Remove the three Phillips PM2.0×3.0 screws in the optical drive bay. 6. Turn the computer right-side up, with the front toward you. 7. Open the LED board cable ZIF connector 1, and then disconnect the cable. 8. Open the TouchPad cable ZIF connector 2, and then disconnect the cable. 9. Remove the two Torx T8M2.5×6.0 slotted screws 3 that attach the top cover to the base enclosure. Removal and replacement procedures 4-23
Removal and replacement procedures
4–23
5. Remove the three Phillips PM2.0×3.0 screws in the optical drive bay.
6. Turn the computer right-side up, with the front toward you.
7. Open the LED board cable ZIF connector
1
, and then disconnect the cable.
8. Open the TouchPad cable ZIF connector
2
, and then disconnect the cable.
9. Remove the two Torx T8M2.5×6.0 slotted screws
3
that attach the top cover to the base enclosure.