Compaq 2230s HP Compaq 2230s Notebook PC - Maintenance and Service Guide - Page 62

Disconnect the webcam cable, If it is necessary to remove the webcam module

Get Compaq 2230s - Notebook PC PDF manuals and user guides View all Compaq 2230s manuals
Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

c. Lift the inside edge of the top side of the bezel 1 to disengage it from the clips, and then lift the left and right sides 2 until the bezel disengages from the display enclosure. d. Remove the display bezel 3. The display bezel is available using spare part number 495015-001. Reverse this procedure to install the display bezel. Be careful to route the cables through the side openings in the hinge covers and avoid pinching the cables between the bezel and display enclosure. 2. If it is necessary to remove the webcam module: a. Disconnect the webcam cable 1 from the computer. b. Remove the webcam module 2 from the display enclosure. (The webcam is secured with double-sided tape.) The webcam can also be ordered separately and is available using spare part number 492159-001. Removal and replacement procedures 4-28

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
Removal and replacement procedures
4–28
c.
Lift the inside edge of the top side of the bezel
1
to disengage it from the clips, and then lift the left and
right sides
2
until the bezel disengages from the display enclosure.
d.
Remove the display bezel
3
. The display bezel is available using spare part number 495015-001.
Reverse this procedure to install the display bezel. Be careful to route the cables through the side openings in
the hinge covers and avoid pinching the cables between the bezel and display enclosure.
2. If it is necessary to remove the webcam module:
a.
Disconnect the webcam cable
1
from the computer.
b.
Remove the webcam module
2
from the display enclosure. (The webcam is secured with
double-sided tape.) The webcam can also be ordered separately and is available using spare part number
492159-001.