Compaq 321 Compaq 320, 321, 420, 421, 620, 621 Notebook PCs and HP 420, 620 No - Page 97
to release the bezel from the display enclosure ., Remove the display assembly
View all Compaq 321 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Remove the display assembly: 1. If it is necessary to replace the display bezel, display enclosure, or display hinges, remove the two mylar screw covers (1) and the 2 Phillips PM2.5×4.0 screws (2) that secure the display bezel to the display assembly. The screw covers are available in the Rubber Kit, spare part number 598678-001. 2. Starting at the top of the display, flex the bezel (1) and work around the periphery of the bezel (2) and (3) to release the bezel from the display enclosure . 3. Lift the bezel (4) from the display enclosure. Component replacement procedures 87
Remove the display assembly:
1.
If it is necessary to replace the display bezel, display enclosure, or display hinges, remove the
two mylar screw covers
(1)
and the 2 Phillips PM2.5×4.0 screws
(2)
that secure the display bezel
to the display assembly. The screw covers are available in the Rubber Kit, spare part number
598678-001.
2.
Starting at the top of the display, flex the bezel
(1)
and work around the periphery of the bezel
(2)
and
(3)
to release the bezel from the display enclosure .
3.
Lift the bezel
(4)
from the display enclosure.
Component replacement procedures
87