Compaq Armada e500 Compaq Armada E500 Series Reference Guide - Page 88

Using Modem Commands and Dial Modifiers You can configure most communications software without the use of AT commands or dial modifiers. s If you prefer to configure the modem using AT commands, select StartÅProgramsÅAccessoriesÅHyperTerminal. s To access an AT command set including dial modifiers and instructions, go to the Compaq Internet site at http://www.compaq.com/support/portables. Uninstalling the Modem To uninstall the modem software and hardware under Windows NT 4.0, you must log into Windows NT 4.0 with Administrator privileges. To uninstall the modem software and hardware under Windows 95, Windows 98, or Windows NT 4.0: 1. Click StartÅSettingsÅControl Panel. 2. Double-click the Add/Remove Programs icon. 3. Select the Compaq internal model from the list of software. 4. Click the Add/Remove button. 5. Click Yes to confirm. 6. If you are prompted to restart the system, click Yes. Remove the modem hardware from the computer. Using the Modem While Traveling Internationally Using a Country-Specific Modem Adapter Telephone jacks vary by country. The modem cable included with the computer plugs directly into an RJ-11 telephone jack. To plug the modem cable into a different type of telephone jack, you must use a country-specific modem cable adapter. A cable adapter is provided with the computer. To obtain the country-specific adapters required for your itinerary, refer to Appendix A to contact a Compaq-authorized dealer, reseller, or service provider. Using an Internal Modem (Available on Select Models) 7-3