Compaq ML530R Service Guide - Page 68
Table 3-2, POST Error Messages, Error Code, Audible Beeps, Probable Source of Problem
UPC - 720591250300
View all Compaq ML530R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
3-8 Compaq ProLiant ML530 Servers Maintenance and Service Guide Error Code A Critical Error occurred prior to this power-up Unsupported Processor Detected System Halted FATAL ROM ERROR: The System ROM is not properly programmed 101-ROM Error 101-I/O ROM Error 102-System Board Failure 104-ASR-2 Timer Failure 105-Current System ROM is corrupt - now booting redundant System ROM 162-System Options Not Set 163-Time & Date Not Set 164-Memory Size Error 172-Configuration Nonvolatile Memory Invalid 173-Slot ID Mismatch Table 3-2 POST Error Messages Audible Beeps None 1 long, 1 short Probable Source of Problem A catastrophic system error, which caused the server to crash, has been logged. Processor not supported by current system ROM. 1 long, 1 short ROM programmed in the factory incorrectly. Recommended Action Run Diagnostics. Replace the failed assembly as indicated. Check documentation for supported processors, and if supported, remove the processor and update the system to the latest ROM. Then reinstall the processor. Flash the ROM or replace the physical ROM part. 1 long, 1 short None None System ROM checksum Options ROM checksum DMA, timers, and so on None 2 long System board failure Nonbooted ROM image is corrupt. Run Diagnostics. Replace the failed assembly as indicated. Run Diagnostics. Replace the failed assembly as indicated. Replace the system board. Run the Compaq System Configuration Utility. Run Diagnostics. Replace the failed assembly as indicated. Flash the ROM utilizing ROMPaq. 2 short 2 short 2 short None None Configuration incorrect Invalid time or date in configuration memory Configuration memory incorrect Nonvolatile configuration corrupt or jumper installed. Run the System Configuration Utility and correct the configuration. Run the System Configuration Utility and correct the time or date. Run the System Configuration Utility and correct memory configuration. Run the System Configuration Utility and correct. Board replaced, configuration not updated. Run the System Configuration Utility and correct. continued