Compaq Presario CQ70-100 HP G70 Notebook PC Compaq Presario CQ70 Notebook PC - - Page 65
Compaq Presario CQ70-100 - Notebook PC Manual
View all Compaq Presario CQ70-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Removal and replacement procedures Remove the TouchPad on/off button board and board bracket: 1. Turn the top cover upside down, with the front toward you. 2. Release the ZIF connector on the TouchPad button board to which the TouchPad on/off board cable is attached, and then disconnect the TouchPad on/off board cable 1 from the TouchPad button board. 3. Release the ZIF connector on the TouchPad board to which the TouchPad on/off board cable is attached, and disconnect the TouchPad on/off board cable 2 from the TouchPad board. 4. Remove the Phillips PM1.5x3.0 screw 3 securing the TouchPad on/off button board. 5. Single-sided and double-sided tape is used to help secure the TouchPad on/off button board to the TouchPad board bracket. Release the on/off button board from the tape, and then remove the TouchPad on/off button board 4. 6. Six Phillips PM1.5x3.0 screws secure the TouchPad board bracket to the base enclosure. Remove these six screws 1, and then remove the TouchPad board bracket 2. Maintenance and Service Guide 4-29