Compaq Presario CQ70-100 HP G70 Notebook PC Compaq Presario CQ70 Notebook PC - - Page 74
Modem module cable
View all Compaq Presario CQ70-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Removal and replacement procedures Modem module cable Description Modem module cable Spare part number 489125-001 Before removing the modem module cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-6). 5. Remove the following components: a. Optical drive (see "Optical drive" on page 4-7) b. Hard drive (see "Hard drive" on page 4-9) c. Keyboard (see "Keyboard" on page 4-15) d. Keyboard cover (see "Keyboard cover" on page 4-17) e. Power button board (see "Power button board" on page 4-19) f. Display assembly (see "Display assembly" on page 4-20) g. Top cover (see "Top cover" on page 4-26) h. Speakers (see "Speakers" on page 4-33) i. System board (see "System board" on page 4-35) Remove the modem module cable: 1. Remove the modem module cable from the clip 1 built into the base enclosure. 2. Remove the modem module cable 2 from the clips and routing channels built into the base enclosure 3. Reverse this procedure to install the modem module cable. 4-38 Maintenance and Service Guide