Compaq Presario CQ70-100 HP G70 Notebook PC Compaq Presario CQ70 Notebook PC - - Page 75
Fan/heatsink assembly
View all Compaq Presario CQ70-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Fan/heatsink assembly Removal and replacement procedures Description Fan/heatsink assembly (includes replacement thermal material) Spare part number 489126-001 Before removing the fan, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-6). 5. Remove the following components: a. Optical drive (see "Optical drive" on page 4-7) b. Hard drive (see "Hard drive" on page 4-9) c. Keyboard (see "Keyboard" on page 4-15) d. Keyboard cover (see "Keyboard cover" on page 4-17) e. Power button board (see "Power button board" on page 4-19) f. Display assembly (see "Display assembly" on page 4-20) g. Top cover (see "Top cover" on page 4-26) h. Bluetooth module (see "Bluetooth module" on page 4-32) i. System board (see "System board" on page 4-35) Remove the fan/heatsink assembly: 1. Turn the system board right-side up, with the front toward you. 2. Disconnect the fan cable from the system board. ✎ To properly ventilate the computer, allow at least a 7.6-cm (3-inch) clearance on the left side of the computer. Maintenance and Service Guide 4-39