Compaq Presario CQ70-100 HP G70 Notebook PC Compaq Presario CQ70 Notebook PC - - Page 73
Remove the system board, from the base enclosure by sliding it up and to the right at an angle.
View all Compaq Presario CQ70-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Removal and replacement procedures 7. Release the power cable from the base enclosure 1. 8. Use the optical drive connector 2 to lift the right edge of the system board 3 until it rests at an angle. 9. Remove the system board 4 from the base enclosure by sliding it up and to the right at an angle. 10. Remove the optical drive connector from the system board. Reverse this procedure to install the system board. Maintenance and Service Guide 4-37
Removal and replacement procedures
Maintenance and Service Guide
4–37
7. Release the power cable from the base enclosure
1
.
8. Use the optical drive connector
2
to lift the right edge of the system board
3
until it rests at an angle.
9. Remove the system board
4
from the base enclosure by sliding it up and to the right at an angle.
10. Remove the optical drive connector from the system board.
Reverse this procedure to install the system board.