Compaq ProLiant 6400R Compaq Parallel Database Cluster Model PDC/O1000 for Ora - Page 88
Installing GBIC-SW Modules for the RA4000 Array Controller, Cabling the Storage Hub, FC-AL Switch
View all Compaq ProLiant 6400R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Installation and Configuration 5-9 Installing GBIC-SW Modules for the RA4000 Array Controller For the PDC/O1000, each RA4000/RA4100 Array contains one single-port Compaq StorageWorks RAID Array 4000 Controller (RA4000 Array Controller) and ships with GBIC-SW modules. Insert one module into the RA4000 Array Controller and the other module into the Storage Hub, FC-AL Switch, or Fibre Channel SAN Switch port for the controller. To install GBIC-SW modules for an RA4000 Array Controller: 1. Insert one GBIC-SW module into the RA4000 Array Controller in each RA4000/RA4100 Array. 2. Insert a GBIC-SW module into the port on the Storage Hub, FC-AL Switch or Fibre Channel SAN Switch for that RA4000 Array controller. 3. Repeat steps 1 and 2 for all other RA4000/RA4100 Arrays in the non-redundant Fibre Channel Fabric or non-redundant FC-AL. Cabling the Storage Hub, FC-AL Switch, or Fibre Channel SAN Switch to the RA4000 Array Controllers Figure 5-2 shows one Storage Hub, FC-AL Switch, or Fibre Channel SAN Switch connected to the RA4000 Array Controller in one RA4000/RA4100 Array. Fibre Host Adapters Client LAN Fibre Host Adapters ProLiant Servers Switch (Cluster Interconnect) ProLiant Servers Storage Hub/Switch RA4000/4100 Array Figure 5-2. Cabling a Storage Hub, FC-AL Switch, or Fibre Channel SAN Switch to an RA4000 Array Controller