Craftsman 11580 Operation Manual
Craftsman 11580 - C3 19.2 Volt Hammer Manual
 |
View all Craftsman 11580 manuals
Add to My Manuals
Save this manual to your list of manuals |
Craftsman 11580 manual content summary:
- Craftsman 11580 | Operation Manual - Page 1
AL 112 iN, 19,2 VOLT HAMMER DRILL VARIABLE SPEED Model No. 315.115800 ,& WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product. Customer Help Line: 1-800-932-3188 BATTERIES AND CHARGERS SOLD SEPARATELY Sears, Roebuck and Co., 3333 - Craftsman 11580 | Operation Manual - Page 2
-20 [] Exploded View and Parts List ... 21 [] Parts Ordering/Service ... Back Page ONE-YEAR FULL WARRANTY ON CRAFTSMAN TOOL If this Craftsman tool fails to give complete satisfaction within one year from date of purchase, RETURN iT TO ANY SEARS STORE OR OTHER CRAFTSMAN OUTLET iN THE UNITED STATES - Craftsman 11580 | Operation Manual - Page 3
do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. [] Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the - Craftsman 11580 | Operation Manual - Page 4
manual. [] When servicing a power tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance instructions may create a risk of shock or injury. [] Wear ear protectors with impact drills - Craftsman 11580 | Operation Manual - Page 5
Alternating Current Direct Current no No Load Speed [] Class II Tool Type of current Type or a characteristic of current Rotational speed, reduce the risk of injury, user must read and understand operator's manual before using this product. Always wear safety goggles or safety glasses with - Craftsman 11580 | Operation Manual - Page 6
. If you do not understand the warnings and instructions in the operator's manual, do not use this product. Call the Craftsman Consumer Helpline at 1-800-932-3188 for assistance. ,_k WARNING: The operation of any power tool can result in foreign objects being thrown into your eyes, which can result - Craftsman 11580 | Operation Manual - Page 7
PRODUCT SPECiFICATiONS Chuck 1/2 in. Keyless Motor 19.2 V, DC Switch Variable Speed No Load Speed 0-400/0-1,400 r/min (RPM) Hammer Speed 0-5,200/0-18,200 BPM* Clutch 24 Position Torque Blows Per Minute 420 in.lb. TORQUE ADJUSTMENTRiNG KEYLESS CHUCK TWO-SPEED GEARTRAIN(HI-LO) QUICKMODE - Craftsman 11580 | Operation Manual - Page 8
KNOWYOUR HAMMER DRILL See Figure 1. The safe use of this product requires an understanding of the information on the tool and in this operator's manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety - Craftsman 11580 | Operation Manual - Page 9
, please call 1-800-932-3188 for assistance. PACKING LiST Hammer Drill with Auxiliary Handle Assembly Bits (2) Operator's Manual ,,_ WARNING: If any parts are damaged or missing do not operate this tool until the damaged or missing parts are replaced. Failure to do so could result in possible - Craftsman 11580 | Operation Manual - Page 10
with side shields when operating tools. Failure to do so could Hammer drilling in concrete, brick, or other masonry This product will accept DieHarde_ 19.2 V lithium-ion battery packs and Craftsman 19.2 V nickel-cadmium battery packs. For complete charging instructions, refer to the Operator's Manual - Craftsman 11580 | Operation Manual - Page 11
to become overheated. If this occurs, cool the drill by running it without a load and at full speed. SWITCH TRIGGER Fig. 4 NOTE: You might hear a whistling or ringing noise from the switch during use. Do not be concerned; this is a normal part of the switch function. FORWARD/ REVERSE/ CENTERLOCK - Craftsman 11580 | Operation Manual - Page 12
, speed will increase and unit will have less power and torque. Use LO (1) speed for high power and torque applications and Hi (2) speed for fast drilling or driving applications. TWO-SPEED GEARTRAIN(HI-LO_ 1LL) LO SPEED SPEED DRILLBIT LOCK (TIGHTEN) CHUCK BODY Fig. 6 Fig. 7 12 - Craftsman 11580 | Operation Manual - Page 13
types of screws into different materials. To use the torque settings, rotate the mode selector to the screw ( _._ ) setting. (The hammer mode ( _ ) and drill mode (_'_'q) are for full torque operations.) The proper setting depends on the type of material and the application. ADJUSTING TORQUE See - Craftsman 11580 | Operation Manual - Page 14
trigger by placing the direction of rotation selector in the center position. [] Open or close the chuck jaws to a point where the opening is slightly larger than the bit size you intend to use. Also, raise the front of the drill slightly to keep the bit from falling out of the chuck jaws - Craftsman 11580 | Operation Manual - Page 15
starting threads, the hex nut has been trapped inside the molded slot in the auxiliary handle. The depth stop rod helps control the depth of drilled holes. NOTE: When properly installed, the teeth on the depth stop rod should be aligned with the teeth indicator on the depth gauge clamp. Adjust - Craftsman 11580 | Operation Manual - Page 16
, practice on a scrap piece to determine the best speed and pressure. NOTE: The hammer drill has not been designed for reverse hammering. TO DECREASE TORQUE TOINCREASE TORQUE MODE TORQUE SELECTOR ADJUSTINGRiNG Fig. 14 DRILLING Fig. 15 See Figures 15- 16. Levels are located on the top and - Craftsman 11580 | Operation Manual - Page 17
the bit with oil to improve drilling action and increase bit life. MASONRY DRILLING For maximum performance, use carbide-tipped masonry impact bits when drilling holes in brick, tile, concrete, etc. [] Slide adjustment button on hammer drill left for hammer mode. [] Apply light pressure and medium - Craftsman 11580 | Operation Manual - Page 18
the customer. All other parts should be replaced at a Sears Service Center. BATTERIES This product will accept DieHardo 19.2 V lithium-ion battery packs and Craftsman 19.2 V nickel-cadmium battery packs. The batteries for this product have been designed to provide maximum trouble-free life. However - Craftsman 11580 | Operation Manual - Page 19
[] Insert a 5/16 in. or larger hex key into the chuck of the drill and tighten the chuck jaws securely. [] Tap the hex key sharply with a trigger by placing the direction of rota- tion selector in the center position. [] Open the chuck jaws. [] Insert the hex key into the chuck and tighten the - Craftsman 11580 | Operation Manual - Page 20
*-" CRAFTSMAN 19.2V CORDLESS HAMMER DRILL - 315.115800 -* I Tnhuembmeor deinl anllucmobrreerspwoinlldebnecefoundregoanrdaingplayteouarttHacAhMedMEtRo thDeRmILoLtoor r hwohuesningo. rdAelrwinagysrempaeinr tipoanrtst.he model i] SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS 4 Key PaN No. Number
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
 |
 |
PERATOR'S
MAN
AL
112
iN,
19,2 VOLT HAMMER
DRILL
VARIABLE SPEED
Model
No.
315.115800
,&
WARNING:
To reduce the risk of
injury,
the user must read and understand
the
operator's
manual before using this
product.
Customer
Help
Line:
1-800-932-3188
BATTERIES
AND CHARGERS
SOLD
SEPARATELY
Sears,
Roebuck
and Co.,
3333
Beverly
Rd.,
Hoffman
Estates,
IL 60179
USA
Visit the Craftsman
web page: www.sears.com/craftsman
983000-879
12-27-07
(REV:03)
Save
this
manual
for
future
reference
C