Craftsman 11580 Operation Manual - Page 13

ADJUSTABLETORQUE CLUTCH This product is equipped with an adjustable torque clutch for driving different types of screws into different materials. To use the torque settings, rotate the mode selector to the screw ( _._ ) setting. (The hammer mode ( _ ) and drill mode (_'_'q) are for full torque operations.) The proper setting depends on the type of material and the application. ADJUSTING TORQUE See Figure 8. There are twenty-four torque indicator settings located on the front of the drill. [] Rotate the adjusting ring to the desired setting. • 1 - 4 For driving small screws 5 - 8 For driving screws into soft material 9 - 12 For driving screws into soft and hard materials 13 - 16 For driving screws into hard wood 17 - 24 For driving large screws BIT STORAGE See Figure 9. When not in use, bits provided with the drill can be placed in the storage area located on the base of the drill. BIT STORAGEAREA SCREWDRIVERBIT Fig. 9 TO DECREASE TORQUE TOINCREASE TORQUE MODE TORQUE SELECTOR ADJUSTINGRiNG Fig. 8 13