Craftsman 11585 Operation Manual
Craftsman 11585 - C3 19.2 Volt 7-1/4 in. Circular Saw Manual
 |
View all Craftsman 11585 manuals
Add to My Manuals
Save this manual to your list of manuals |
Craftsman 11585 manual content summary:
- Craftsman 11585 | Operation Manual - Page 1
PERATOR'S MAN AL ® 7-1/4 in., 19.2 VOLT CORDLESS DUAL LASER CIRCULAR SAW Model No. 315.115850 WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product. BATTERIES AND CHARGERS SOLD SEPARATELY Customer Help Line: 1-800-932-3188 Sears, - Craftsman 11585 | Operation Manual - Page 2
Symbols ...[] Features ... 7-8 9-10 [] Assembly ... 10-11 [] Operation ... 12-20 [] Adjustments ... 21 [] Maintenance ... 22 [] Exploded View and Parts List ... 23-24 [] Parts Ordering/Service ... Back Page ONE-YEAR FULL WARRANTY ON CRAFTSMAN TOOL If this Craftsman tool fails to give complete - Craftsman 11585 | Operation Manual - Page 3
moving parts. Damaged or entangled cords increase the risk of electric shock. [] When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. [] Use battery only with charger listed. MODEL 315.115850 - Craftsman 11585 | Operation Manual - Page 4
the risk of injury, user must read instruction manual. [] When servicing a power tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance instructions may create a risk of shock or injury - Craftsman 11585 | Operation Manual - Page 5
lower guard into the open position. If saw is accidentally dropped, serviced before use. Lower guard may operate sluggishly due to damaged parts, gummy deposits, or a buildup of debris. [] Lower guard should be retracted manually serious personal injury. [] Battery tools do not have to be plugged - Craftsman 11585 | Operation Manual - Page 6
supply cord is damaged, it must be replaced only by the manufacturer or by an authorized service center to avoid risk. LASER GUIDE WARNINGS: The laser guide radiation used in the Craftsman circular saw is Class Ilia with maximum - Craftsman 11585 | Operation Manual - Page 7
SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current mz Current no No Load Speed [] Class II Tool Type of current Type or a characteristic of risk of injury, user must read and understand operator's manual before using this product. Always wear safety goggles or - Craftsman 11585 | Operation Manual - Page 8
. If you do not understand the warnings and instructions in the operator's manual, do not use this product. Call the Craftsman Consumer Helpline at 1-800-932-3188 for assistance. ,_ WARNING: The operation of any power tool can result in foreign objects being thrown into your eyes, which can result - Craftsman 11585 | Operation Manual - Page 9
PRODUCT SPECIFICATIONS Motor 19.2 Volt DC Blade Diameter 7-1/4 in. Blade Arbor 5/8 in. Cutting Depth at 90 2-3/8 in. Cutting Depth at 45 1-13/16 in. No Load Speed 3,500 r/min. (RPM) Laser Guide Class Ilia, - Craftsman 11585 | Operation Manual - Page 10
the tool and any accessories from the box. Make sure that all items listed in the packing list are included. [] Inspect the tool carefully Circular Saw 7-1/4 in. Blade Edge Guide Hex Key (5 mm) Operator's Manual ,_ WARNING: If any parts are damaged or missing do not operate this tool until the parts - Craftsman 11585 | Operation Manual - Page 11
will prevent blade screw from securing blade on spindle. Either of these situations could result in a serious accident. [] Remove the battery pack from the saw. [] Remove the hex key from the storage area. [] Depress and hold the spindle lock button and remove the blade screw and outer blade washer - Craftsman 11585 | Operation Manual - Page 12
/Rip Cutting [] Bevel Cutting [] Pocket Cutting This product will accept DieHarde_ 19.2 V lithium-ion battery packs and Craftsman 19.2 V nickel-cadmium battery packs. For complete charging instructions, refer to the Operator's Manual for the battery packs and chargers listed in the General Safety - Craftsman 11585 | Operation Manual - Page 13
blade [] Supporting the workpiece incorrectly [] Forcing a cut [] Cutting warped or wet lumber [] Operating the tool incorrectly or misusing the tool To or nails before cutting. Never saw into a knot or nail. [] Make straight cuts. Always use a straight edge guide when rip cutting. This helps - Craftsman 11585 | Operation Manual - Page 14
on underside of work, keep hands and fingers away from cutting area. Any part of your body coming in contact with moving blade will result in serious injury. STARTING/STOPPING THE SAW See Figure 10. To start the saw: While depressing the lock-off button, depress the switch trigger. Always let - Craftsman 11585 | Operation Manual - Page 15
when changing operation settings or when the tool is not in use. Failure to remove the battery of the upper blade guard. [] Hold the base flat against the workpiece and raise or lower the saw until the indicator mark on the bracket aligns with the desired scale measurement on the blade guard. [] - Craftsman 11585 | Operation Manual - Page 16
tool is not in use. Failure to heed this warning could result in possible serious personal injury. The laser guides to the "Adjustments" section later in this manual. NOTE: Make a trial cut on a . [] Insert battery pack into saw and press the laser guide button to activate the laser. [] Start - Craftsman 11585 | Operation Manual - Page 17
the workpiece near the cut. [] Clamp the workpiece securely so that the workpiece will not move during the cut. [] Always place the saw on the workpiece that is supported, not the "cut off" piece. [] Place the workpiece with the "good" side down. [] Draw a guideline along the desired line of cut - Craftsman 11585 | Operation Manual - Page 18
C-CLAMPS Fig. 17 TO RiP CUT WiTH EDGE GUIDE See Figure 19. [] Secure the workpiece. Fig. 18 [] Position the face of the edge guide firmly against the edge of workpiece. [] Guide the saw along the edge to achieve a straight rip cut. NOTE: The guiding edge of the workpiece must be straight for - Craftsman 11585 | Operation Manual - Page 19
result in serious injury. TO BEVEL CUT See Figure 22, [] Hold the saw firmly with both hands as shown. [] Rest the front edge of the base on the workpiece. [] Start the saw and let the blade reach full speed. [] Guide the saw into the workpiece and make the cut. [] Release the trigger and allow - Craftsman 11585 | Operation Manual - Page 20
flat against the workpiece with the rear of the handle raised so the blade does not touch the workpiece. [] Start the saw and let the blade reach full speed. [] Guide the saw into the workpiece and make the cut. _ WARNING: Always cut in a forward direction when pocket cutting. Cutting in the reverse - Craftsman 11585 | Operation Manual - Page 21
of the base as a straight line guide to aid in the adjusting process. To adjust the front laser: [] Remove the blade. [] Insert battery pack into the saw. [] Turn laser on. [] _u__gth: .......ClassIlia masepr r0duct BSOnm Complies with 21CFR parts 1040.10 and 1040.11 RYLD Fig. 26 Fig. 25 - Craftsman 11585 | Operation Manual - Page 22
A WARNING: When servicing, use only identical Craftsman replacement parts. Use of any other part may create a hazard or cause product damage. A WARNING: Always wear safety goggles or safety glasses with side shields when using compressed air to clean tools. If the operation is dusty, also wear a - Craftsman 11585 | Operation Manual - Page 23
31 14 32 S CRAFTSMAN CIRCULAR SAW- MODEL NUMBER 315.115850 _,3o 29 8 - Craftsman 11585 | Operation Manual - Page 24
CRAFTSMAN CIRCULAR SAW MODEL NUMBER 315.115850 n_uhembemroidnelanllucmobrreerspwoinlldbeencfeoundregoanrdaingplayteouar ttCacIRhCedULAtoRtheSmAWotoor r hwohuesningo.rdAelrwinagysrempaeinr tipoanrtst.he model "_ ] J Key PaN No. Number 1 660803001 2 610121002 3 610120003 4 660211012 5
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
 |
 |
PERATOR'S
MAN
AL
®
7-1/4
in.,
19.2
VOLT
CORDLESS
DUAL
LASER
Model No.
315.115850
CIRCULAR
SAW
WARNING:
To reduce the risk of
injury,
the user must read and understand
the
operator's
manual before using this
product.
BATTERIES
AND
CHARGERS
SOLD
SEPARATELY
Customer
Help
Line:
1-800-932-3188
Sears,
Roebuck
and Co.,
3333
Beverly
Rd.,
Hoffman
Estates,
IL 60179
USA
Visit the Craftsman
web page: www.sears.com/craftsman
983000-797
10-29-08
(REV:03)
Save
this
manual
for
future
reference
C